Cat Compact Track and Multi Terrain Loaders:

920 Compact Wheel Loader

Rated Net Power - Rated Engine Speed
2200 r/min
Forward and Reverse - Speed Range 1*
6.3 mile/h
Rated Net Power - SAE J1349
120 HP
Maximum Gross Power - ISO 14396 (metric)
122 HP

The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.



Product Specs

  • Engine

  • Rated Net Power - Rated Engine Speed
    2200r/min
    Rated Net Power - SAE J1349
    120HP
    Maximum Gross Power - ISO 14396 (metric)
    122HP
    Rated Net Power - ISO 9249
    118HP
    Maximum Gross Torque - SAE J1995
    372ft·lbf
    Maximum Gross Torque - ISO 14396
    369ft·lbf
    Displacement
    220in³
    Bore
    3.85in
    Stroke
    4.72in
    Engine Model
    Cat C3.6
    Emissions
    Engine meets Tier 4 Final/Stage V emission standards.
    Note
    Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Gross Power - ISO 14396
    121HP
    Maximum Gross Power
    121HP
    Bore
    3.86in
    Stroke
    4.72in
    Displacement
    220in³
    Maximum Gross Power - Maximum Engine Speed
    2350r/min
    Emissions
    Engine meets Tier 4 Final/Stage V emission standards.
    Note
    Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Rated Net Power - Rated Engine Speed
    2200r/min
    Rated Net Power - SAE J1349
    120HP
    Maximum Gross Power - ISO 14396 (DIN)
    122HP
    Maximum Gross Power - ISO 14396
    121HP
    Maximum Gross Torque - SAE J1995
    372ft·lbf
    Engine Model
    Cat C3.6
    Maximum Gross Power - SAE J1995
    123HP
    Rated Net Power - ISO 9249 (DIN)
    120HP
    Rated Net Power - ISO 9249
    118HP
    Maximum Gross Torque - ISO 14396
    369ft·lbf
    Maximum Gross Power
    121HP
  • Transmission

  • Forward and Reverse - Speed Range 1*
    6.3mile/h
    Forward and Reverse - Speed Range 1*
    6.3mile/h
    Note
    *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
    Note
    *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
  • Buckets

  • Bucket Capacities - General Purpose
    1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material
    2.5-3.5 m³ (3.3-4.6 yd³)
    Bucket Capacities
    1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - General Purpose
    1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material
    2.5-3.5 m³ (3.3-4.6 yd³)
    Bucket Capacities
    1.3-1.9 m3 (1.7-2.5 yd3)
  • Weights

  • Operating Weight
    21742lb
    Operating Weight
    21742lb
  • Steering

  • Maximum Working Pressure - Steering Pump
    3190psi
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
    2.3s
    Steering Articulation Angle - Each Direction
    40°
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    3.4turns
    Maximum Flow - Steering Pump
    21.7gal/min
    Maximum Working Pressure - Steering Pump
    3190psi
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
    2.3s
    Steering Articulation Angle - Each Direction
    40°
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    3.4turns
    Maximum Flow - Steering Pump
    21.7gal/min
  • Loader Hydraulic System

  • Relief Pressure - Tilt Cylinder
    4641psi
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
    25gal/min
    Maximum Flow - Implement Pump
    43.6gal/min
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
    4641psi
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
    2.7s
    Note
    All cycle times listed are with cylinder snubbing turned off.
    Maximum Working Pressure - Implement Pump
    4061psi
    Hydraulic Cycle Time - Total Cycle Time
    11.5s
    Hydraulic Cycle Time - Rackback
    2.2s
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
    25gal/min
    Hydraulic Cycle Time - Dump, at Maximum Reach
    1.8s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
    4.8s
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
    40gal/min
    Relief Pressure - Tilt Cylinder
    4641psi
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
    25gal/min
    Maximum Flow - Implement Pump
    43.6gal/min
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
    4641psi
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
    2.7s
    Note
    All cycle times listed are with cylinder snubbing turned off.
    Maximum Working Pressure - Implement Pump
    4061psi
    Hydraulic Cycle Time - Total Cycle Time
    11.5s
    Hydraulic Cycle Time - Rackback
    2.2s
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
    25gal/min
    Hydraulic Cycle Time - Dump, at Maximum Reach
    1.8s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
    4.8s
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
    40gal/min
  • Service Refill Capacities

  • Transmission
    0.8gal (US)
    Engine Crankcase
    2.6gal (US)
    Diesel Exhaust Fluid (DEF) Tank
    4.8gal (US)
    Axles - Rear
    4.5gal (US)
    Cooling System
    5.7gal (US)
    Hydraulic System - Including Tank
    25.9gal (US)
    Axles - Front
    4.5gal (US)
    Fuel Tank
    43.6gal (US)
    Hydraulic Tank
    14.5gal (US)
    Note
    DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Transmission
    0.8gal (US)
    Engine Crankcase
    2.6gal (US)
    Diesel Exhaust Fluid (DEF) Tank
    4.8gal (US)
    Axles - Rear
    4.5gal (US)
    Cooling System
    5.7gal (US)
    Hydraulic System - Including Tank
    25.9gal (US)
    Axles - Front
    4.5gal (US)
    Fuel Tank
    43.6gal (US)
    Hydraulic Tank
    14.5gal (US)
    Note
    DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Axles

  • Rear
    Oscillating ±11 degrees; Locking differential (standard)
    Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ±11 degrees; Locking differential (standard)
    Front
    Fixed; Locking differential (standard)
  • Cab

  • ROPS
    ISO 3471:2008
    FOPS
    EN ISO 3449:2008 (ISO 3449:2005)
    Note (3)
    The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (2)
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (4)
    *The measurements were conducted with the cab doors and windows closed.
    ROPS
    ISO 3471:2008
    FOPS
    EN ISO 3449:2008 (ISO 3449:2005)
    Note (3)
    The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (2)
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (4)
    *The measurements were conducted with the cab doors and windows closed.
  • Tires

  • Other Choices Include
    17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
    Standard Size
    17.5 R25 L2 XTLA
    Note (1)
    Other tire choices are available. Contact your Cat dealer for details.
    Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Other Choices Include
    17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
    Standard Size
    17.5 R25 L2 XTLA
    Note (1)
    Other tire choices are available. Contact your Cat dealer for details.
    Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Request a Quote

Find a Boyd CAT
Location or Rep Near You