Mining Trucks:
795F AC Mining Trucks
Contact Us About This Product
Click a link to download the document:
- Nominal Payload Capacity
- 345.0 tons
- Engine Model
- Cat C175-16
- Gross Power - SAE J1995
- 3400.0 hp
- Top Speed - Loaded
- 40.0 mph
For those applications and situations where you prefer an electric drive truck, Caterpillar offers the 795F AC.The Cat AC drive system provides customers with the best retarding, braking and control in the industry. Designed and manufactured by Caterpillar, the 795F AC is the first AC electric drive truck that is single sourced from one manufacturer, and supported by the best dealer network in the industry.
Product Specs
-
Operating Specifications
- Nominal Payload Capacity
- 345.0tons
- Top Speed - Loaded
- 40.0mph
- Steer Angle
- 34.0Degrees
- Turning Circle Clearance Diameter
- 127.0ft
- Turning Diameter - Front
- 112.0ft
- Gross Machine Operating Weight (GMW)
- 1257000lb
- Nominal Payload Capacity
- 345ton (US)
- Top Speed - Loaded
- 40mile/h
- Steer Angle
- 34°
- Turning Circle - Clearance Diameter
- 127ft
- Turning Diameter - Front
- 112ft
-
Engine
- Engine Model
- Cat C175-16
- Gross Power - SAE J1995
- 3400.0hp
- Bore
- 6.9in
- Stroke
- 8.7in
- Displacement
- 5187.0in3
- Net Power
- 3188.0hp
- Net Power - SAE J1349
- 3299HP
- Rated Speed
- 1800r/min
- Note (1)
- Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
- Note (2)
- Additional fuel optimized selectable power ratings: 2312 kw / 3,100 hp
- Note (3)
- Contact factory for trolley configuration.
- Engine Model
- Cat® C175-16
- Gross Power - SAE J1995
- 3400HP
- Bore
- 6.9in
- Stroke
- 8.7in
- Displacement
- 5187in³
- Net Power
- 3188HP
-
Weights - Approximate
- Chassis Weight
- 445524.0lb
- Gross Machine Operating Weight (GMW)
- 1257000lb
- Body Weight Range
- 38 500-54 500 kg (84,900-120,000 lb)
- Rated Gross Machine Weight
- 1269999lb
- Body Weight - MSD
- 85237lb
- Note (1)
- Consult your tire manufacturer for maximum tire load.
- Note (2)
- Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
- Note (3)
- Refer to Cat Mining Truck 10/10/20 Overload Policy (AEHQ0250) for maximum gross machine weight limitations.
- Chassis Weight
- 440462lb
-
Final Drives
- Total Reduction Ratio
- 35:1
- Total Reduction Ratio
- 35:1
-
Suspension
- Effective Cylinder Stroke - Front
- 11.5in
- Effective Cylinder Stroke - Rear
- 5.6in
- Rear Axle Oscillation
- ±4.8°
- Effective Cylinder Stroke - Front
- 11.5in
- Effective Cylinder Stroke - Rear
- 5.6in
- Rear axle - Oscillation
- ±4.8°
-
Body Hoists
- Pump Flow - High Idle
- 247.0gal/min
- Relief Valve Setting - Raise
- 3553.0psi
- Body Raise Time - High Idle
- 19.0Seconds
- Body Lower Time - Float
- 20.0Seconds
- Body Power Down - High Idle
- 17.5Seconds
- Pump Flow - High Idle
- 247gal/min
- Relief Valve Setting - Raise
- 3553psi
- Body Raise Time - High Idle
- 19s
- Body Lower Time - Float
- 20s
- Body Power Down - High Idle
- 17.5s
-
Service Refill Capacities
- Cooling System
- 291.0gal
- Crankcase
- 82.0gal
- Steering Tank
- 55.5gal
- Steering System (Includes Tank)
- 79.0gal
- Brake/Hoist Hydraulic Tank
- 134.2gal
- Brake/Hoist System (Includes Tank)
- 396.3gal
- Final Drives, Each
- 90.0gal
- Fuel Tank
- 950.0gal
- Fuel Tank - Optional
- 1900gal (US)
- Front Wheels - Each
- 8gal (US)
- Hydraulic Tank
- 134gal (US)
- Hydraulic System - Including Tank
- 396gal (US)
- Grease Tank
- 60lb
- Cooling System
- 291gal (US)
- Crankcase
- 82gal (US)
- Steering Tank
- 55.5gal (US)
- Steering System - Including Tank
- 79gal (US)
- Brake/Hoist Hydraulic Tank
- 134.2gal (US)
- Brake Hoist System - Includes Tank
- 396.3gal (US)
- Final Drive - Each
- 90gal (US)
- Fuel Tank
- 950gal (US)
-
Weight Distributions - Approximate
- Front Axle - Loaded
- 33.0%
- Rear Axle - Loaded
- 67.0%
- Front Axle - Empty
- 48.0%
- Rear Axle - Empty
- 52.0%
- Front Axle - Loaded
- 33%
- Rear Axle - Loaded
- 67%
- Front Axle - Empty
- 48%
- Rear Axle - Empty
- 52%
-
Capacity - MSD II - 100% Fill Factor
- Heaped (SAE 2:1)
- 181-252 m3 (237-330 yd3)
- Struck
- 121.5-211 m3 (159-276 yd3)
- Note
- Consult your local Cat dealer for body recommendations.
- Heaped (SAE 2:1)
- 181-252 m³ (237-330 yd³)
- Struck
- 122-211 m³ (159-276 yd³)
-
Sound
- Sound Standards
- Standards
- Sound Standards
- Standards
-
Steering
- Steering Standards
- SAE J1511 OCT90 ISO 5010:1992
- Steer Angle
- 34°
- Turning Diameter - Front
- 38.5ft
- Note
- Turning Diameter (ISO 7457:2009)
- Steering Standards
- ISO 5010:2007
-
Tires
- Standard Tires
- Choices
- Optional Tires
- 56/80 R63
- Note (1)
- Quick Change Rims optional.
- Note (2)
- Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
- Standard Tires
- 59/80 R63
-
Braking System
- Blended Four Corner Retarding
- Standard
- Dynamic Retarding Power
- 6370HP
- Electric Retarding - Radial Grid Design with Brushless AC Fan Motor
- 4750 kW (6,370 hp) rated power
- Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Front
- 20500.09in²
- Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Rear
- 30750.2in²
- Oil Cooled Brakes - Retarding Capable at All Speeds - Outside Diameter
- 42in
- Oil Cooled Brakes - Retarding Capable at All Speeds - Standards
- J-ISO 3450 JAN88, ISO 3450:1996
- Service Brakes
- Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
- Front Wet Disc Brake Surface Area
- 20500in²
- Rear - Wet Disc Brake Surface Area
- 30750in²
- Standards
- Service and Secondary: ISO 3450:1996
- Parking Brake
- Four corner, multi disk, spring applied, hydraulically released
- Dynamic Retarding Power - Continuous
- 6370HP
-
AC Drive System
- Controls
- IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
- Cooling System
- Variable speed, hydraulic cooling system
- Generator/Alternator
- Brushless, remote mounted, dual bearing
- Wheel Motor
- Rear axle mounted Cat AC induction
-
Cab
- FOPS Standards
- FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II criteria.
- ROPS Standards (2)
- ROPS (Rollover Protective Structure) meets ISO 3471:2008 criteria.
- Air Conditioning
- HFC - 134A refrigerant: 24300 Btu/hr
- Note
- Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
- ROPS Standards (1)
- The operator sound pressure level, 75 dB(A), complies with ISO 6394:2008 and ISO 6396:2008.
-
Dimensions (Approximate)
- Height - Top of ROPS
- 20.75ft
- Overall Length
- 49.75ft
- Wheel Base
- 22.06ft
- Rear Axle - Tail
- 14.5ft
- Ground Clearance
- 2.5ft
- Dump Clearance
- 5.5ft
- Loading Height - Empty
- 23.1ft
- Overall Height - Body Raised
- 50.67ft
- Centerline Front Tire Width
- 20.5ft
- Engine Guard Clearance
- 4ft
- Overall Canopy Width
- 31ft
- Outside Body Width
- 29.43ft
- Inside Body Width
- 25.75ft
- Front Canopy Height
- 25.59ft
- Rear Axle - Clearance
- 3.33ft
- Centerline of Rear Dual Tire Width
- 18.62ft
- Overall Tire Width
- 29.5ft
-
ROPS
- ROPS Standards
- Standards
Equipment
-
- Electrical
-
- Alarm, Back-up
- Brushless Alternator, 150 ampere
- Batteries, 210-amp hour, low maintenance, 12-volt (2)
- Converter, 12-volt electrical
- Electrical System, 24-volt, 10, 15 and 20 amp
- Battery Charge Receptacle
- Lighting System: - Back-up and Hazard Lights - Directional Signals (front and rear LED) - Front Stair Access/Service Deck - Stop/Tail Lights (LED) - Engine Compartment - VIMS, Blue Light (LED) - Headlights, with Lo-Hi Beam Selector
-
- Operator Environment
-
- Air Conditioner with Automatic Climate Control
- 12-volt DC Power Supply (3)
- Coat Hook
- Cup Holder
- Diagnostic Connection Port
- Dome Courtesy Light
- Map Lights (2)
- Entertainment Radio Ready: - 20 amp Switched/10 amp Memory Converter, Speakers and Wiring Harnesses
- Gauge Panel:
– Drive Train (system temperature)
– Brake Oil Temperature
– Engine Coolant Temperature
– Fuel Level
– Torque Converter Oil Temperature - Electric Engine Control Fault Indicator - Electric Hour Meter - Speedometer - Tachometer - Heater/Defroster, 10 310 kCal (40,912 BTU)
- Hoist, Body Control (electric)
- Horn (2)
- Cat Detect (Radar and Camera) System
- Mirrors, Right and Left
- ROPS Cab, Insulated/Sound Suppressed
- Seat, Operator, Air Suspension
- Seatbelt, Operator, Three Points, Retractable
- Seatbelt, Trainer, Two Points, Retractable
- Stairway and Walkway Access, 600 mm (23.6 in)
- Steering Wheel, Tilt, Padded, Telescopic
- Storage Compartments
- Tinted Glass
- Transmission Gear Indicator
- VIMS Message Center with Advisor
- Window, Operator, Electric Powered
- Windshield, Wiper Intermittent Control and Washer
-
- Power Train
-
- Cat C175-16 Tier 2 Emissions Compliant Engine: - Air Cleaner with Precleaner (4) - Air-to-Air Aftercooler (ATAAC) - Automatic Starter Protection - Ether Starting Aid (automatic) - Multi-Point Oil Pressure Sensing - Turbocharging (4)/Aftercooled
- Braking System: - Automatic Retarder Control, Adjustable - Brake Release Motor (towing) - Engine Overspeed Protection - Extended Life Brake Disc Material - Oil-cooled, Multi-disc (front and rear) - Service, Retarding, Parking, Secondary - Park Brake Integrated with Gear Selector - Secondary, Emergency
- Cat AC Drivetrain: - IGBT controlled AC induction motors - AC generator - AC cooled radial grid - Body-up Reverse Neutralizer - Body-up Shift Inhibitor - Directional Shift Management - Neutral Coast Inhibitor - Neutral Start Switch - Programmable Top Speed - Reverse Shift Inhibitor
- Pre-lubrication/Engine
- Rear Axle Continuous Lubrication/Filtration
-
- Other Standard Equipment
-
- Air Starter, Turbine
- Air System Dryer
- Automatic Lubrication System
- Aux “Buddy” Dumping Quick Connect
- Aux Steering Quick Connect (towing)
- Blended Retarding System
- Driveline Guards
- Exhaust
- Fuel Tank, 3596 L (950 gal)
- Fast Fill Fuel System
- Fuel Filter with Water Separator
- Ground Level Battery Lockout
- Ground Level Engine Shut-down
- Ground Level Engine Start Lockout
- Ground Level Machine Lockout
- Ground Level Transmission Lockout
- Ground Level VIMS Data Port
- Hi-speed Crankcase Oil Change
- Hydraulic Filters, 1,000 hour
- Payload Indicator Lights
- Reservoirs (2 separate): - Brake/Hoist, Steering/Fan
- Rock Ejectors
- Service Points, Ground Level
- Sight Level Gauges for Hydraulic/Engine Oil
- SOS℠ Sample Ports
- Supplemental Steering (automatic)
- Tie Down Eyes
- Tow Hooks and Pin (front): - Tow Pin (rear) (Empty truck only)
- Traction Control System
- Vandalism Protection Locks
- Vital Information Management System (VIMS): - Includes VIMS Payload Monitor with MAX Payload and Speed Manager - VIMS 3G requires download cable 305-5528 VIMS 3G Connect PC software (reference media number EERP2001) and VIMS PC software JERD2175. Supplemental software “VIMS Supervisor” YERA1403. Order separately. Computer not provided.
-
- Antifreeze
-
- Extended Life Coolant to -35° C (-30° F)
-
- Body
-
- MSD II Body: Body, MSD II, 181 m3 (237 yd3) Body, MSD II, 220 m3 (288 yd3)
- MSD II Body Attachments: Extensions, 400 mm (~15 in) 206 m3 (270 yd3); Fits 181 m3 (237 yd3) body Extensions, 395 mm (~15 in) 237 m3 (310 yd3); Fits 220 m3 (288 yd3) body Extensions, 550 mm (~21 in) 248 m3 (324 yd3); Fits 220 m3 (288 yd3) body Extensions, 675 mm (~26 in) 252 m3 (330 yd3); Fits 220 m3 (288 yd3) body
- Films, Body
- Gateless Coal Body: Body, Gateless Coal, 352 m3 (460 yd3)
- Gateless Coal Body Attachments: Extensions, 440 mm (~17 in) 382 m3 (500 yd3) Extensions, 875 mm (~34 in) 413 m3 (540 yd3) Extensions, 1060 mm (~41 in) 428 m3 (560 yd3)
-
- Body Mounting Groups
-
- MSD II Body
- Gateless Coal Body
- Cat Trolley Assist Attachment
-
- Optional Equipment
-
- Access Platform, Rear Part of Chassis
- Additional Lighting
- Additional Retarding for Downhill Hauls
- Air Start, Turbine, TDI
- Antifreeze/Coolant Protects to –50° C (–58° F)
- Body
– MSD II Body:- Body, MSD II, 181 m³ (237 yd³)
- Body, MSD II, 220 m³ (288 yd³)
– MSD II Body Attachments:- Extensions, 400 mm (~15 in) 206 m³ (270 yd³); Fits 181 m³ (237 yd³) body
- Extensions, 395 mm (~15 in) 237 m³ (310 yd³); Fits 220 m³ (288 yd³) body
- Extensions, 550 mm (~21 in) 248 m³ (324 yd³); Fits 220 m³ (288 yd³) body
- Extensions, 675 mm (~26 in) 252 m³ (330 yd³); Fits 220 m³ (288 yd³) body
– Films, Body
– Gateless Coal Body:- Body, Gateless Coal, 352 m³ (460 yd³)
– Gateless Coal Body Attachments:- Extensions, 440 mm (~17 in) 382 m³ (500 yd³)
- Extensions, 875 mm (~34 in) 413 m³ (540 yd³)
- Extensions, 1060 mm (~41 in) 428 m³ (560 yd³)
- Body Heat
- Body Mounting Groups
– MSD II Body
– Gateless Coal Body - Brake Wear Indicator Gauge
- Cabin Air Precleaner
- Camera Only Vision System
- Cat Comfort Air Suspension Trainer Seat
- Cat Comfort Heated Operator Seat
- Electric Powered Window, Right Side
- Electric Starting System
- Engine (High Altitude)* (*For certain markets only.)
- Engine Coolant and Oil Heater for Cold Weather Starts
- Engine Delay Shutdown Timer
- Filtration, Final Drive Oil Cooler
- External Digital Payload Display
- Fuel Tank (7192 L/1,900 gal)
- Gauge, Brake Wear Indicator
- Ground Access, Powered
- Ground Access, Fixed, Reversed
- Ground Access, Powered, Reversed
- Heated Mirrors, RH
- Heated Mirrors, LH
- High Intensity Discharge (HID) Lighting (front and rear)
- Horn, Air or Electric, LH or RH
- Instructions (ANSI or ISO)
- Language Monitors – English, Spanish, French, German, Italian, Portuguese, Dutch, Norwegian, Swedish, Estonian, Latin, Lithuanian, Slovakian, Slovenian, Greek, Roman, Russian, Polish, Czech, Hungarian, Icelandic, Finnish, Danish, Thai, Indonesian, Vietnam, Malaysian, Chinese, Japan, Korean, Croat, Serbian, Mongolian, Hebrew, Turkish, Arabic
- Machine Access, Reversed
- Portable Fire Extinguisher
- Retractable Front Sun Visor
- Road Analysis Control (RAC)
- Seat, Full Size, Trainer
- Service Center, Pressurized System
- Service Center, Non-Pressurized System
- SL-V Grease Injectors
- Wheel Chocks
- Wheels, Wedge, 1041 mm (41 in)
- Cat Trolley Assist Attachment