Cat Skid Steer Loaders:

226D Skid Steer Loader

226D Skid Steer Loader
Engine Model
Cat C2.2 CRDI
Net Flywheel Power
65.8 hp
Rated Operating Capacity
1550 lb
Peak Torque at 1,500 rpm SAE J1995
153 lbf-ft

The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.



Product Specs

  • Engine

  • Engine Model
    Cat C2.2 CRDI
    Net Flywheel Power
    65.8hp
    Peak Torque at 1,500 rpm SAE J1995
    153lbf-ft
    Net Power ISO 9249
    66.5hp
    Net Power SAE 1349
    65.8hp
    Displacement
    134.3in3
    Stroke
    3.9in
    Bore
    3.3in
    Engine Model
    Cat C2.2 CRDI
    Net Flywheel Power
    65.8HP
    Gross Power - SAE J1995
    67.1HP
    Displacement
    134.3in³
    Stroke
    3.9in
    Bore
    3.3in
    Net Power - ISO 9249
    66.5HP
    Peak Torque - 1,500 rpm - SAE J1995
    153ft·lbf
    Net Power - SAE 1349
    65.8HP
  • Operating Specifications

  • Rated Operating Capacity
    1550lb
    Rated Operating Capacity with Optional Counterweight
    1650lb
    Tipping Load
    3100lb
    Breakout Force, Tilt Cylinder
    3983lb
    Rated Operating Capacity
    1550lb
    Tipping Load
    3100lb
    Breakout Force - Tilt Cylinder
    3983lb
    Rated Operating Capacity with Optional Counterweight
    1650lb
    Note
    Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
  • Weights

  • Operating Weight
    5705lb
    Operating Weight
    5705lb
    Note
    Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
  • Dimensions

  • Wheelbase
    41.5in
    Length without Bucket
    99.4in
    Length with Bucket on Ground
    127.3in
    Height to Top of Cab
    79.8in
    Maximum Overall Height
    143.8in
    Bucket Pin Height at Maximum Lift
    110.9in
    Bucket Pin Height at Carry Position
    8.5in
    Clearance at Maximum Lift and Dump
    81.8in
    Ground Clearance
    6.9in
    Departure Angle
    27.9°
    Maximum Dump Angle
    46.7°
    Vehicle Width over Tires
    58.9in
    Turning Radius from Center – Machine Rear
    59.6in
    Turning Radius from Center – Coupler
    43.5in
    Turning Radius from Center – Bucket
    77.8in
    Maximum Reach with Arms Parallel to Ground
    50.7in
    Rack Back Angle at Maximum Height
    88.9°
    Wheel Base
    41.5in
    Height - Top of Cab
    79.8in
    Vehicle Width over Tires
    58.9in
    Ground Clearance
    6.9in
    Departure Angle
    27.9°
    Maximum Dump Angle
    46.7°
    Bucket Pin Height - Carry Position
    8.5in
    Bucket Pin Height - Maximum Lift
    110.9in
    Clearance at Maximum Lift and Dump
    81.8in
    Length - With Bucket on Ground
    127.3in
    Length - Without Bucket
    99.4in
    Maximum Overall Height
    143.8in
    Maximum Reach - With Arms Parallel to Ground
    50.7in
    Rack Back Angle - Maximum Height
    88.9°
    Turning Radius from Center - Bucket
    77.8in
    Turning Radius from Center - Coupler
    43.5in
    Turning Radius from Center - Machine Rear
    59.6in
    Reach - Maximum Lift/Dump
    21in
    Bumper Overhang - Behind Rear Axle
    35.2in
    Note
    Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
  • Cab

  • ROPS
    ISO 3471:2008
    FOPS
    ISO 3449:2005 Level I
    FOPS Level II
    ISO 3449:2005 Level II
    ROPS
    ISO 3471:2008
    FOPS
    ISO 3449:2005 Level I
    FOPS Level II
    ISO 3449:2005 Level II
  • Power Train

  • Travel Speed (Forward or Reverse): One Speed
    7.6mph
    Travel Speed (Forward or Reverse): Two Speed Option
    11.1mph
    Travel Speed - Forward or Reverse - One Speed
    7.6mile/h
    Travel Speed - Forward or Reverse - Two Speed Option
    11.1mile/h
  • Service Refill Capacities

  • Chain Box, each side
    1.8gal
    Cooling System
    3.2gal
    Engine Crankcase
    2.6gal
    Fuel Tank
    15.1gal
    Hydraulic System
    11.9gal
    Hydraulic Tank
    9.0gal
    Cooling System
    3.2gal (US)
    Engine Crankcase
    2.6gal (US)
    Fuel Tank
    15.1gal (US)
    Hydraulic System
    11.9gal (US)
    Hydraulic Tank
    9gal (US)
    Chain Box - Each Side
    1.8gal (US)
  • Hydraulic System

  • Hydraulic Flow – Standard: Loader Hydraulic Pressure
    3336psi
    Hydraulic Flow – Standard: Loader Hydraulic Flow
    18gal/min
    Hydraulic Flow – Standard: Hydraulic Power (calculated)
    35.5hp
    Hydraulic Flow – High Flow: Maximum Loader Hydraulic Pressure
    3336psi
    Hydraulic Flow – High Flow: Maximum Loader Hydraulic Flow
    26gal/min
    Hydraulic Flow – High Flow: Hydraulic Power (calculated)
    50.9hp
    Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
    50.9HP
    Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
    26gal/min
    Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
    3336psi
    Hydraulic Flow - Standard - Hydraulic Power (Calculated)
    35.5HP
    Hydraulic Flow - Standard - Loader Hydraulic Flow
    18gal/min
    Hydraulic Flow - Standard - Loader Hydraulic Pressure
    3336psi
  • Air Conditioning System

  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
  • Noise Level

  • Inside Cab*
    83dB(A)
    Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (2)
    *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
    Note (3)
    **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
    Outside Cab**
    102dB(A)

Equipment

  • Electrical
    • 12 volt Electrical System
    • 80 ampere Alternator
    • Ignition Key Start/Stop Switch
    • Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
    • Backup Alarm
    • Heavy Duty Battery, 880 CCA
  • Operator Environment
    • Gauges: Fuel Level, Hour Meter
    • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
    • Adjustable Vinyl Seat
    • Fold In Ergonomic Contoured Armrest
    • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
    • ROPS Cab, Open, Tilt Up
    • FOPS, Level I
    • Top and Rear Windows
    • Floor Mat
    • Interior Rearview Mirror
    • 12 volt Electric Socket
    • Horn
    • Hand (Dial) Throttle, Electronic
    • Adjustable Joystick Controls
    • Anti-theft Security System with 6-button Keypad
    • Storage Compartment with Netting
  • Power Train
    • Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final/Stage IIIB Emission Standards
    • Air Cleaner, Dual Element, Radial Seal
    • S·O·SSM Sampling Valve, Hydraulic Oil
    • Filters, Cartridge-type, Hydraulic
    • Filters, Cartridge-type, Fuel and Water Separator
    • ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
    • Spring Applied, Hydraulically Released Parking Brakes
    • Hydrostatic Transmission
    • Four Wheel Chain Drive
  • Other
    • Engine Enclosure, Lockable
    • Extended Life Antifreeze, –36° C (–33° F)
    • Machine Tie Down Points (6)
    • Support, Lift Arm
    • Hydraulic Oil Level Sight Gauge
    • Radiator Coolant Level Sight Gauge
    • Radiator, Expansion Bottle
    • Cat ToughGuard Hose
    • Auxiliary, Hydraulics, Continuous Flow
    • Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
    • Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
    • Electrical Outlet, Beacon
    • Belly Pan Cleanout
    • Variable Speed Demand Fan
    • Product Link PL240, Cellular
  • Mandatory Equipment
    • Hydraulics, Standard or High Flow
    • Quick Coupler, Mechanical or Powered
    • Seat Belt, 50 mm (2 in) or 75 mm (3 in)
    • EU Preparation Package (Europe only)
    • Power Train: One Speed, One Speed with Ride Control, Two Speed or Two Speed with Ride Control
    • Tires, 10 × 16.5
    • PERFORMANCE PACKAGES:
      • Performance Package H1: Standard Flow Hydraulics (No Self Level)
      • Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Electronic Snubbing (Raise and Lower)
      • Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Electronic Snubbing (Raise and Lower)
    • COMFORT PACKAGES:
      • Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
      • Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
      • Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
      • Enclosed ROPS with A/C (C3): C2 + Air Conditioner
  • Optional Equipment
    • Hand-Foot Style Controls
    • External Counterweights
    • Beacon, Rotating
    • Engine Block Heater – 120V
    • Oil, Hydraulic, Cold Operation
    • Paint, Custom
    • Product Link PL641, Cellular
    • Advanced Display: Full Color, 5 in LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Rearview Camera Ready
    • Advanced Display: Rearview Camera Included (standard equipment in Europe only)
    • Work Tool Return to Dig and Work Tool Positioner
    • Bluetooth Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)

Request a Quote

Find a Whayne or Walker
Location or Rep Near You