Underground - Hard Rock:

AD30 Underground Mining Truck

Engine Model
Cat® C15 ACERT™
Gross Power - SAE J1995
409 hp
Gross Machine Mass
132300 lb
Bore
5.4 in

The AD30 underground mining truck is designed for high production, low cost-per-ton hauling in smaller underground mining applications. Rugged construction and easy maintenance guarantee long life with low operating costs.<br>Engineered for performance, designed for comfort, built to last.



Product Specs

  • Engine

  • Engine Model
    Cat® C15 ACERT™
    Gross Power - SAE J1995
    409hp
    Bore
    5.4in
    Stroke
    6.8in
    Displacement
    928.0in3
    Engine Model
    Cat® C15
    Gross Power - SAE J1995
    409HP
    Bore
    5.4in
    Stroke
    6.8in
    Displacement
    928in³
    Rated Power
    1800r/min
    Gross Power - VR Engine - SAE J1995
    409HP
    Gross Power - Tier 3 Engine - SAE J1995
    409HP
    Note (3)
    Engine derate will commence at an altitude of 2743 m (8,999 ft).
    Note (2)
    Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
    Note (1)
    Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
    Note (4)
    Optional Ventilation Reduction package available.
  • Operating Specifications

  • Gross Machine Mass
    132300lb
    Gross Machine Mass
    132300lb
    Nominal Payload Capacity
    66139lb
    Body Capacities
    11.3-17.5 m³ (14.8-22.9 yd³)
  • Transmission

  • Forward 1
    4.2mph
    Forward 2
    7.6mph
    Forward 3
    13.9mph
    Forward 4
    25.4mph
    Reverse 1
    4.8mph
    Forward - 1
    3.9mile/h
    Forward - 2
    7mile/h
    Forward - 3
    12.9mile/h
    Forward - 4
    22.8mile/h
    Reverse - 1
    4.4mile/h
    Note
    Maximum travel speeds with standard 26.5 × R25 tires.
  • Body Capacities

  • Body 2 (Standard Body)
    18.8yd3
    Body 2 - Standard Body
    18.8yd³
    Body 1
    14.8yd³
    Body 3
    22.9yd³
    Wide Body
    21.9yd³
    Ejector Body (1)
    19.9yd³
    Ejector Body (2)
    21.9yd³
    Note
    Heaped SAE 2:1.
  • ROPS

  • ROPS Standards
    ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
    FOPS Standards
    FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.
    ROPS Standards
    ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
    FOPS Standards
    FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.
  • Final Drives

  • Differential Ratio
    3.38:1
    Total Reduction Ratio
    16.13:1
    Differential Ratio
    3.38:1
    Total Reduction Ratio
    16.13:1
    Final Drive Ratio
    4.76:1
    Note
    Fully floating axles.
  • Service Refill Capacities

  • Transmission
    18.0gal
    Hydraulic Tank
    87.0gal
    Cooling System
    20.0gal
    Fuel Tank
    132.0gal
    Transmission
    18gal (US)
    Hydraulic Tank
    38gal (US)
    Cooling System
    20gal (US)
    Fuel Tank
    108gal (US)
    Engine Crankcase - With Filter
    9gal (US)
    Front Differential and Final Drives
    15gal (US)
    Rear Differential and Final Drives
    15gal (US)
  • Weights

  • Empty
    63647lb
    Front Axle (1)
    42944lb
    Rear Axle (1)
    20704lb
    Loaded
    132277lb
    Front Axle (2)
    58451lb
    Rear Axle (2)
    73826lb
    Empty - Rear Axle
    20704lb
    Loaded - Rear Axle
    73826lb
    Empty - Front Axle
    42944lb
    Loaded - Front Axle
    58451lb
  • Weight Distribution

  • Front Axle (1)
    67.5%
    Rear Axle (1)
    32.5%
    Front Axle (2)
    44.2%
    Rear Axle (2)
    55.8%
    Empty - Rear Axle
    32.50%
    Loaded - Front Axle
    44.20%
    Loaded - Rear Axle
    55.80%
    Empty - Front Axle
    67.50%
  • Body Hoist

  • Raise
    10.5s
    Lower
    11.2s
    Total Cycle Time
    21.7s
  • Turning Dimensions

  • Outside Clearance Radius
    337.4in
    Inner Clearance Radius
    198in
    Axle Oscillation
    10°
    Articulation Angle
    42.5°
    Frame Oscillation
    10 Degrees
  • Tires

  • Tire Size
    26.5 × R25 VSNT
  • Standards

  • Standards
    ROPS/FOPS Certified Cab

Equipment

  • Electrical
    • 12V power supply in cab
    • Alternator, 95-amp
    • Auxiliary start receptacle
    • Battery disconnect switch, ground level
    • Circuit breaker, 80-amp
    • Corrosive protection spray
    • Diagnostic connector
    • Electric starting, 24V
    • Engine shutdown switch, ground level
      – Front left hand side
    • Lighting
      – Brake and tail light, LED
      – Headlights with dimmer switch, halogen
      – Rear work light (cab mounted), halogen
      – Reversing lights, halogen
    • Low maintenance batteries
    • Reversing alarm
    • Starting and charging system
  • Operator Environment
    • Cat Electronic Monitoring System (Cat EMS)
    • Electric horns
    • Gauges
      – Engine coolant temperature
      – Transmission coolant temperature
      – Hydraulic oil temperature
      – Fuel level
      – Speedometer
      – Tachometer
    • Indicator lights
      – Alert warning light
      – Body up position warning
      – High beam
      – Residual brake pressure warning
      – Retarder application
      – Turn signal
    • Low hydraulic level warning
    • Open operator station ROPS/FOPS structure
    • Operator presence system (auto park brake)
    • Rearview mirrors
    • Suspension seat Cat Comfort TLV2 with retractable seat belt
    • Trainer/passenger seat and seat belt
    • Tilt/telescopic steering wheel
  • Power Train
    • Cat C15 ATAAC diesel engine, 6-cylinder
    • Automatic brake retarder control
    • Auto shift transmission 4 speed forward/1 speed reverse
    • Axle, arrangement standard width, front – rear
    • Control throttle shifting
    • Engine air intake precleaner
    • Electric fuel priming pump
    • Exhaust, turbo compartment shielding
    • Four wheel drive
    • Long life coolant
    • Programmable ground speed limiting
    • Programmable gear block out with tray up
    • Radiator cap manual release
    • Radiator, cross flow
    • Rims, 5-piece, tubeless
    • SAFR full hydraulic enclosed wet, multiple-disc brakes, oil cooled
    • Torque converter with automatic lockup
  • Other Standard Equipment
    • Body, dump, (14.4 m³/18.8 yd³)
    • Catalytic exhaust purifier/muffler group
    • Centralized lubrication points
    • Decals, international picto graphics
    • Engine and transmission belly guards
    • Fenders, standard with, front, rear flaps
    • Fire wall
    • Fuel system manual shut off tap
    • Frame lifting lugs
    • Front and rear tow pin
    • Hand hold (access on/off top deck)
    • Hitch, articulated and oscillated
    • Operation and Maintenance Manual – English and other applicable local languages to select
    • S·O·S port
      – Coolant
      – Engine oil
      – Hydraulic oil
      – Transmission oil
    • Swing out radiator grill
    • Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
  • Optional Equipment
    • Axle, arrangement wide body, front – rear
    • Battery shutdown
      – Ground level isolation, in cab isolation switch
      – Ground level isolation, engine shutdown switch
      – Ground level isolation, in cab isolation, engine shutdown switch
    • Body dump
      – Body, (11.3 m³/14.8 yd³)
      – Body, (16.8 m³/21.9 yd³) wide body configuration
      – Body, (17.5 m³/22.9 yd³)
    • Body ejector
      – Ejector, (15.2 m³/19.9 yd³)
      – Ejector, (16.8 m³/21.9 yd³)
    • Body liners, impact and wear
      – 10 mm (0.4"), body, dump (11.3 m³/14.8 yd³)
      – 10 mm (0.4"), body, dump (14.4 m³/18.8 yd³)
      – 10 mm (0.4"), dump (16.8 m³/21.9 yd³) for wide body configuration
      – 10 mm (0.4"), body, dump (17.5 m³/22.9 yd³)
    • Brake pressure gauges
    • Camera, color rear facing
    • Cover, anti vandalism for shipping
    • Engine options
      – Engine, Ventilation Reduction (VR)
      – Equivalent to Tier 3
      – After-treatment options (for use with VR Engine only)
      • DPF (Flow Through) Filter
    • Fast fill system
      – Coolant
      – Engine oil
      – Fuel (single tank)
      – Hydraulic oil
      – Transmission oil
    • Fenders, wide body, front, rear flaps
    • Fire suppression system
      – Ansul, dry powder
      – Foam, water based
    • Fluids
      – Arctic fuel
      – Arctic coolant
    • Lighting
      – Headlights with dimmer switch, LED
      – Rear work light (cab mounted), LED
      – Reversing lights, LED
    • Lubrication system
      – Automatic, dump or ejector body
      – Centralized, ejector body
    • Mine transfer
      – Mine transfer ready front frame (tack welded)
      – Mine transfer ready dump body (tack welded)
      – Mine transfer ready ejector body (tack welded)
    • Operators station ROPS/FOPS enclosed
      – Air conditioning
      – Cab pressurizer and filter
      – Dome light
      – Heater
      – Radio ready compartment for radio and speakers
      – Sun visor
      – Window, sliding cab door
    • Park brake switch engagement
      – Push to apply
      – Pull to apply
    • Payload
      – Truck Payload Measurement System (TPMS)
      – Remote display for TPMS
    • Reflective tape
    • Rims
      – Rim identification numbering
      – Spare, tubeless
    • Seat
      – Suspension seat Cat Comfort TLV2, vinyl
      – Suspension seat tee, mechanical
    • Seat cover
      – Tee and Cat Comfort TLV2
      – Seat cover, companion
    • Secondary steering system
    • Service tools
      – Collet jacking bolts, dump and ejector
      – Diagnostics box
      – Hoist cylinder supports (for body removal)
      – Brake wear gauge
      – Reference parts manual for additional tooling available
    • Switches
      – Engine shutdown, fire suppression activation
      – Idle timer
      – Engine shutdown, fire suppression activation/idle timer
    • Technology
      – Vital Information Management System (VIMS) Gen 3
    • Tire arrangements
      – Tire, 26.5 × 25 VSNT Bridgestone
      – Tire, 26.5 × 25 VSDL Bridgestone
    • NOTE: Not all features are available in all regions. See your Cat dealer for more information.

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X