Cat Wheel Loaders:

914 Compact Wheel Loader

Maximum Gross Power
110 HP
Forward and Reverse - Speed Range 2*
12.5 mile/h
Engine Model
Cat C3.6
Maximum Gross Torque - ISO 14396
332 ft·lbf

The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.



Product Specs

  • Engine

  • Maximum Gross Power
    110HP
    Engine Model
    Cat C3.6
    Maximum Gross Torque - ISO 14396
    332ft·lbf
    Maximum Gross Power - ISO 14396 (DIN)
    111HP
    Rated Net Power - ISO 9249
    98HP
    Maximum Gross Power - Maximum Engine Speed
    2350r/min
    Emissions
    Engine meets Tier 4 Final/Stage V emission standards.
    Rated Net Power - SAE J1349
    99HP
    Maximum Gross Power - ISO 14396
    110HP
    Maximum Gross Power - SAE J1995
    111HP
    Bore
    3.86in
    Rated Net Power - ISO 9249 (DIN)
    99HP
    Rated Net Power - Rated Engine Speed
    2200r/min
    Stroke
    4.72in
    Displacement
    220in³
    Maximum Gross Torque - SAE J1995
    335ft·lbf
    Note
    Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
  • Transmission

  • Forward and Reverse - Speed Range 2*
    12.5mile/h
    Note
    *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
  • Weights

  • Operating Weight
    19103lb
  • Buckets

  • Bucket Capacities
    1.3-1.9 m3 (1.7-2.5 yd3)
    Bucket Capacities - General Purpose
    1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material
    2.5-3.5 m³ (3.3-4.6 yd³)
  • Steering

  • Maximum Flow - Steering Pump
    22gal/min
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    3.75turns
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
    2.8s
    Maximum Working Pressure - Steering Pump
    3263psi
    Steering Articulation Angle - Each Direction
    40°
  • Loader Hydraulic System

  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
    3046psi
    Maximum Flow - Implement Pump
    39gal/min
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
    24gal/min
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
    3046psi
    Hydraulic Cycle Time - Total Cycle Time
    12.5s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
    5.2s
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow
    24gal/min
    Hydraulic Cycle Time - Dump, at Maximum Reach
    1.4s
    Relief Pressure - Tilt Cylinder
    4931psi
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
    32gal/min
    Maximum Working Pressure - Implement Pump
    4061psi
    Hydraulic Cycle Time - Rackback
    2.2s
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
    3.7s
  • Service Refill Capacities

  • Cooling System
    5.7gal (US)
    Fuel Tank
    43.6gal (US)
    Note
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Axles - Rear Center Differential
    2gal (US)
    Hydraulic System - Including Tank
    25.9gal (US)
    Diesel Exhaust Fluid (DEF) Tank
    4.8gal (US)
    Engine Crankcase
    2.6gal (US)
    Hydraulic Tank
    14.5gal (US)
    Transmission
    0.8gal (US)
    Axles - Front Center Differential
    2gal (US)
  • Tires

  • Other Choices Include
    17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
    Note (1)
    Other tire choices are available. Contact your Cat dealer for details.
    Standard Size
    17.5 R25 L2 XTLA
    Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
  • Cab

  • ROPS
    ISO 3471:2008
    FOPS
    EN ISO 3449:2008 (ISO 3449:2005)
    Note (4)
    *The measurements were conducted with the cab doors and windows closed.
    Note (2)
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (3)
    The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Axles

  • Rear
    Oscillating ±11 degrees; Locking differential (Standard)
    Front
    Fixed; Locking differential (standard)

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X