Cat Wheel Loaders:

930M Small Wheel Loader

Operating Weight
30879 lb
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Engine Model
Cat® C7.1 ACERT™
Front Axles
6.9 gal

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.



Product Specs

  • Weights

  • Operating Weight
    30879lb
    Operating Weight
    31382lb
  • Buckets

  • Bucket Capacities
    2.1-5.0 m3 (2.7-6.5 yd3)
    Bucket Capacities
    2.1-5.0 m3 (2.7-6.5 yd3)
    Bucket Capacities – General Purpose
    2.1-2.7 m3 (2.7-3.5 yd3)
    Bucket Capacities – Light Material
    3.1-5.0 m3 (4.0-6.5 yd3)
    Bucket Capacities - Light Material
    3.1-5.0 m³ (4.0-6.5 yd³)
    Bucket Capacities - General Purpose
    2.1-2.7 m³ (2.7-3.5 yd³)
  • Engine

  • Engine Model
    Cat® C7.1 ACERT™
    Maximum Gross Power
    164hp
    Note
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Note
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Note
    Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    Engine Model
    Cat C7.1**
    Maximum Gross Power
    168HP
    Bore
    4in
    Stroke
    5in
    Displacement
    427in³
    Emissions
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
    601ft·lbf
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
    586ft·lbf
    Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    572lb/ft
    Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    572lb/ft
    Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
    588ft·lbf
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
    573ft·lbf
    Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    162HP
    Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
    160HP
    Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600r/min
    Note (1)
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Note (2)
    *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Note (3)
    **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
    Note (4)
    Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    156HP
    Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    158mhp
    Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    156HP
    Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    166mhp
    Rated Net Power
    157HP
    Maximum Rated Gross Power - ISO 14396
    164HP
    Maximum Rated Gross Power - ISO 14396 (DIN)
    166HP
    Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
    1800r/min
    Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
    164HP
    Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
    166HP
    Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    163HP
    Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    160HP
    Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    162hp
    Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)
    592lbf-ft
    Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)
    566lbf-ft
    Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    572lbf-ft
    Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600rpm
    Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)
    160hp
    Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)
    168HP
    Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
    170mhp
    Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    156hp
    Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    158hp
    Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)
    592lbf-ft
    Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)
    566lbf-ft
    Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    572lbf-ft
    Displacement
    427in3
    Bore
    4in
    Displacement (Performance Power Mode: Speed Range 1-4)
    427in³
    Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)
    160HP
    Displacement (Standard Power Mode: Speed Range 1-3*)
    427in³
    Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    162mhp
    Emissions
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Stroke
    5in
    Note
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Service Refill Capacities

  • Front Axles
    6.9gal
    Rear Axles
    6.6gal
    Note
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Hydraulic System (Including Tank)
    43.6gal
    Hydraulic Tank
    23.8gal
    Diesel Exhaust Fluid (DEF) Tank
    5.0gal
    Cooling System
    7.9gal (US)
    Diesel Exhaust Fluid (DEF) Tank
    5gal (US)
    Engine Crankcase
    5.3gal (US)
    Front Axles
    6.9gal (US)
    Fuel Tank
    51.5gal (US)
    Hydraulic System - Including Tank
    43.6gal (US)
    Hydraulic Tank
    23.8gal (US)
    Rear Axles
    6.6gal (US)
    Transmission - Gear Box
    2.2gal (US)
    Fuel Tank
    51.5gal
    Cooling System
    7.9gal
    Engine Crankcase
    5.3gal
    Transmission (Gear Box)
    2.2gal
  • Axles

  • Front
    Fixed; Locking differential (standard)
    Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
    Rear
    Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
  • Steering

  • Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed
    2.4seconds
    Steering Articulation Angle - Each Direction
    40°
    Note
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Steering Cylinder: Double Acting – Bore Diameter
    2.8in
    Steering Cylinder: Double Acting – Rod Diameter
    1.6in
    Steering Cylinder: Double Acting – Stroke
    17.2in
    Maximum Flow - Steering Pump
    34gal/min
    Maximum Flow – Steering Pump
    34gal/min
    Maximum Steering Torque - 0° (Straight Machine)
    37155ft·lbf
    Maximum Working Pressure – Steering Pump
    3500psi
    Maximum Steering Torque - 40° (Full Turn)
    27747ft·lbf
    Maximum Steering Torque – 0° (Straight Machine)
    37155lbf-ft
    Maximum Working Pressure - Steering Pump
    3500psi
    Maximum Steering Torque – 40° (Full Turn)
    27747lbf-ft
    Note (1)
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Note (2)
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
    2.4s
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
    2.8s
    Steering Cylinder, Double Acting - Bore Diameter
    2.8in
    Steering Cylinder, Double Acting - Rod Diameter
    1.6in
    Steering Cylinder, Double Acting - Stroke
    17.2in
    Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
    2.4s
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    3.5turns
    Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
    2.8seconds
  • Transmission

  • Note
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    Note (cont'd)
    Factory default is 7 km/h (4.4 mph).
    Forward and Reverse: Range 1*
    1-13 km/h (0.6-8 mph)
    Forward and Reverse: Range 2
    8mph
    Forward and Reverse: Range 3
    17mph
    Forward and Reverse: Range 4
    25mph
    Forward and Reverse - Range 1*
    1-13 km/h (0.6-8 mph)
    Forward and Reverse - Range 2
    8mile/h
    Forward and Reverse - Range 3
    17mile/h
    Forward and Reverse - Range 4
    25mile/h
    Note
    *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
  • Tires

  • Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Other Choices Include
    20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
    Standard Size
    20.5 R25, radial (L-3)
    Other Choices Include:
    20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
    Other Choices Also Include:
    20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Flexports Gen II
    Standard Size
    20.5 R25, radial (L-3)
    Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (1)
    Other tire choices are available. Contact your Cat dealer for details.
  • Loader Hydraulic System

  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
    1.5s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
    5.1s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
    2.7s
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
    10.1s
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
    1.7s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
    9.3s
    Note
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
    1.5/1.7 seconds
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
    2.7/2.7 seconds
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
    5.1/5.7 seconds
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
    9.3/10.1 seconds
    Lift Cylinder, Double Acting - Bore Diameter
    4.7in
    Lift Cylinder, Double Acting - Rod Diameter
    2.6in
    Lift Cylinder, Double Acting - Stroke
    28.7in
    Maximum Flow - Implement Pump
    50gal/min
    Maximum Flow - Implement Pump - 3rd Function*
    50gal/min
    Maximum Flow - Implement Pump - 4th Function Maximum Flow*
    42gal/min
    Maximum Working Pressure - Implement Pump
    3771psi
    Note (1)
    *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
    Note (2)
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Note (3)
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Relief Pressure - Tilt Cylinder
    4061psi
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
    3771psi
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
    4061psi
    Tilt Cylinder, Double Acting - Bore Diameter
    5.9in
    Tilt Cylinder, Double Acting - Rod Diameter
    3.5in
    Tilt Cylinder, Double Acting - Stroke
    21.9in
    Maximum Flow – Implement Pump
    50gal/min
    Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
    50gal/min
    Maximum Flow – Implement Pump: 4th Function Maximum Flow*
    42gal/min
    Maximum Working Pressure – Implement Pump
    3626psi
    Relief Pressure – Tilt Cylinder
    4061psi
    Relief Pressure – Tilt Cylinder: 3rd and 4th Function Maximum Working Pressure
    3626psi
    Relief Pressure – Tilt Cylinder: 3rd and 4th Function Relief Pressure
    4061psi
    Lift Cylinder: Double Acting – Bore Diameter
    4.7in
    Lift Cylinder: Double Acting – Rod Diameter
    2.6in
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
    50gal/min
    Lift Cylinder: Double Acting – Stroke
    28.7in
    Tilt Cylinder: Double Acting – Bore Diameter
    5.9in
    Tilt Cylinder: Double Acting – Rod Diameter
    3.5in
    Tilt Cylinder: Double Acting – Stroke
    21.9in
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
    2.7s
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)
    5.1/5.7 seconds
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)
    1.5/1.7 seconds
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
    5.7s
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)
    2.7/2.7 seconds
    Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time
    9.3/10.1 seconds
    Note
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
  • Power Train

  • Front Axle
    Fixed
    Front Axle: Traction Aid (standard)
    Locking differential
    Rear Axle
    Oscillating
    Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
    Rear Axle: Oscillation Angle by Tire Size – Solid Tires, 750/65, 620/65, Skidder
    ± 7 degrees
    Rear Axle: Traction Aid (optional)
    Limited slip differential
    Brakes: Service
    Inboard wet disc
    Brakes: Park
    Spring applied hydraulically released
    Note
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Note
    Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Brakes - Parking
    Spring applied hydraulically released
    Brakes - Service
    Inboard wet disc
    Front Axle
    Fixed
    Front Axle - Traction Aid - Standard
    Locking differential
    Note (1)
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Note (2)
    Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Rear Axle
    Oscillating
    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
    Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder
    ± 7 degrees
    Rear Axle - Traction Aid - Optional
    Limited slip differential
  • Cab

  • Note (3)
    *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
    ROPS
    ISO 3471: 2008
    FOPS
    ISO 3449: 2005 LEVEL II
    Note
    Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab
    Note
    * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
    ROPS
    ISO 3471:2008
    FOPS
    ISO 3449:2005 Level II
    Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (2)
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
    – Standard cab: 68 ±3 dB(A)
    – Deluxe cab: 66 ±2 dB(A)
  • Air Conditioning System

  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
  • Operating Specifications

  • Full Turn Tip Load
    18670lb
    Full Turn Tip Load
    18670lb
  • Sound

  • Note (1)
    European Union Directive “2000/14/EC”

Equipment

  • Power Train
    • Axle Duo-Cone seal guards
    • Auto idle shut down feature
    • Cat C7.1 engine
      – Power modes (Standard and Performance)
      – Power by range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      – Operator modes (Default, TC, Hystat, and Ice)
      – Directional Shift Aggressiveness (fast, medium, slow)
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Oil sampling ports
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • Electrical
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, pressurized
    • Camera, rearview, with dedicated display
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Hydraulic control lockout
    • Mirror, single
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Suspension seat, fabric
  • Other Standard Equipment
    • Large-access enclosure doors with adjustable close/open force
    • Cat optimized Z-bar linkage with parallel lift
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures
  • Optional Equipment
    • Autolube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Differential, limited slip, rear
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      – Camera, rearview integrated into advanced display
      – Electrically adjustable external heated mirrors (2)
      – Secondary display to enable features and adjust parameters
      – LED interior lighting
      – Sunscreen, front and rear
      – Touchscreen secondary display
      – Ride control adjustable speed activation
      – Preventative maintenance reminders
      – Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cold start package
      – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Counterweight, additional options
    • Coupler (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guarding packages
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Payload Technology
      – Cat Production Measurement (CPM)
      – CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Rear Object Detection
    • Ride Control System, adjustable through secondary display
    • Seats
      – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      – Dual mode and secondary
    • Tire Pressure Monitoring (TPM)

Request a Quote

Find a Boyd CAT
Location or Rep Near You