Boyd CAT Logo

Diesel Fire Pumps:

Cat® 3412C Fire Pump

Contact Us About This Product

Click a link to download the document:

3412C Fire Pump
Minimum Power
638.0 bhp
Maximum Power
739.0 bhp
Emissions
Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
Rated Speed
1750-2100 rpm

Cat® 3412C Industrial Diesel Fire Pump Engines, with ratings: 476-551 kW (638-739 hp) @ 1750-2100 rpm, are non-certified and are available for global non-regulated areas. They are not FM Approved and not UL Listed. Starting on demand is a must for a fire pump engine – always. Cat® fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.

Product Specs

  • Power Rating

    • Minimum Power
    638.0bhp
    Maximum Power
    739.0bhp
    Rated Speed
    1750-2100 rpm
    Minimum Power
    638HP
    Maximum Power
    739HP
    Rated Speed
    1750-2100 rpm

  • Emission Standards

    • Emissions
    Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
    Emissions
    Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed

  • General

    • Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    14.5:1
    Rotation (from flywheel end)
    Counterclockwise
    Engine Configuration
    V-12, 4-Stroke-Cycle Diesel
    Bore
    137.2 mm (5.4 in)
    Stroke
    152.4 mm (6.0 in)
    Displacement
    27 L (1648 in³)
    Bore
    5.4in
    Stroke
    6in
    Displacement
    1648in³
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    14.5:1
    Rotation from Flywheel End
    Counterclockwise

  • Engine Dimensions - Approximate

    • Height
    1413.2 mm (55.6 in)
    Length
    1999.8 mm (78.7 in)
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
    2579 kg (5686 lb)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    5686lb
    Length
    78.7in
    Height
    55.6in

Equipment

  • Air Inlet System
    • Air cleaner, regular duty with service indicators
    • Turbocharged
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
    • Heat exchanger installed
    • Expansion tank
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor control
    • Hydra-mechanical governor
  • Exhaust System
    • Exhaust manifold
    • Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
  • Flywheels & Flywheel Housings
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter
    • Fuel transfer pump
    • Primary fuel filter
    • Fuel priming pump
  • Instrumentation
    • Instrument panel, LH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Water temperature gauge
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler in valve cover and dipstick, both RH
    • Lube oil filter
    • Rear sump oil pan
  • Mounting System
    • Supports
  • Power Take Off
    • Power take-off (PTO) flywheel stub shaft
  • Protection System
    • Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
  • Starting System
    • 24 volt, LH electric starting motor
    • Jacket water heater (6 kW, 240-480 volt)
  • General
    • Paint: Firepump Red
    • Vibration damper and guard
    • Lifting eyes

Request a Quote

Find a Boyd CAT
Location or Rep Near You