Gas Compression Electric Motors:
CN5086 Electric Motor
Contact Us About This Product
Click a link to download the document:
- Number of Poles
- 8
- Number of Poles
- 8
- Connection of Stator Winding
- Star
- Duty
- Continuous
Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.
Product Specs
-
Electric Motor Specifications
- Number of Poles
- 8
- Number of Poles
- 8
- Connection of Stator Winding
- Star
- Duty
- Continuous
- Enclosure Type/Method of Cooling
- WP-II
- Full Load Current
- 658 Amps
- Insulation
- Class F
- Locked Rotor Amps
- 520% Code E
- Locked Rotor Torque
- 60%
- Maximum Altitude - Before Derate
- 3000ft
- Maximum Ambient Temperature
- 104°F
- No Load Current
- 200 Amps
- Rated Torque
- 29366lb/ft
- Shaft
- 8.5in
- Standards
- NEMA MG1
- Temperature Rise
- Class B at rated load
- Electric Motor Type
- Squirrel Cage Induction Motor
- Full Load Speed
- 894r/min
- Voltage/Frequency
- 4000V ± 10%/60 Hz
- Type of EX-Protection
- Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC)
- Mounting Designation
- F1 or F2
- Enclosure Type/Method of Cooling
- WP-II
- Insulation
- Class F
- Service Factor
- 1.15SF
- Standards
- NEMA MG1
- Max Ambient Temperature
- 104°F
- Max Altitude Before Derate
- 3000ft
- Duty
- Continuous
- Temperature Rise
- Class B at rated load
- Connection of Stator Winding
- Star
- Full Load Current
- 658 Amps
- Locked Rotor Amps
- 520% Code E
- Locked Rotor Torque
- 60%
- Breakdown Torque
- 190%
- No Load Current
- 200 Amps
- Rated Torque
- 29366lb-ft
- Shaft
- 8.5in
Equipment
-
- Bearings
-
- Self-lubricated sleeve bearings
- Insulated non-drive end bearings to reduce bearing currents
- Bearing RTDs for temperature monitoring
-
- Rotors
-
- Designed for minimal vibration
- Dynamic balancing at full operational speed
- Fabricated copper squirrel cages
- Oversized, forged, keyless shaft
- AISI 4140/DIN42CrMo4 shaft
-
- Stators
-
- Radial air ducts ensure uniform and efficient cooling
- Vacuum pressure impregnated with specially formulated epoxy resin
- 2X RTDS per Phase
- Space heater
- Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges