Gas Compression Engines:

G3408C Low Emissions Gas Compression Engine

G3408C Low Emissions Gas Petroleum Engine  Gas Compression Engines
Minimum Rating
425.0 bhp
Maximum Rating
425.0 bhp
Emissions
NSPS Site Compliant Capable or Non-regulated
Displacement
1099.0 in3

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3408C engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3408C engines include gas lift, gas gathering, and wellhead gas compression. Cat G3408C gas engine. Ratings: 317 bkW (425 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment or available for non-regulated areas.



Product Specs

  • Engine Specifications

  • Minimum Rating
    425.0bhp
    Maximum Rating
    425.0bhp
    Emissions
    NSPS Site Compliant Capable or Non-regulated
    Displacement
    1099.0in3
    Compression Ratio
    8.5:1
    Aspiration
    Turbocharged-Aftercooled
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0
    Flywheel Teeth
    136
    Oil Change Interval
    750 hours
    Stroke
    6.0in
    Bore
    5.4in
    Weight - Dry
    4950lb
    Ignition, Protection
    Cat EIS
    Minimum Rating
    425BHP
    Maximum Rating
    425BHP
    Emissions
    NSPS Site Compliant Capable or Non-regulated
    Displacement
    1099in³
    Compression Ratio
    8.5:1
    Aspiration
    Turbocharged-Aftercooled
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0
    Flywheel Teeth
    136
    Oil Change Interval
    750 hours
    Stroke
    6in
    Bore
    5.4in
  • Capacity for Liquids

  • Cooling System
    14.5gal
    Lube Oil System (refill)
    39.0gal
    Cooling System
    14.5gal (US)
    Lube Oil System - Refill
    39gal (US)

Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Electronic governor
    • Air/fuel ratio control
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator (1.5 to 5 psi gas supply required)
    • Natural gas carburetor
  • Ignition System
    • Cat Electronic Ignition System (EIS) with detonation sensitive timing
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — deep sump
    • Oil filler — RH in valve cover and RH dipstick
  • Mounting System
    • Engine supports
  • Protection System
    • Detonation sensitive timing control
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and pulleys
    • Lifting eyes
    • Cylinder block inspection covers
  • Air Inlet System
    • Air cleaner — two-stage
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • Expansion tank
    • Heat exchangers
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
    • Exhaust manifold — instrument holes at each port
  • Fuel System
    • Dual gas regulator
    • Carburetor kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch and clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor
    • Air pressure regulator
    • Air silencer
    • Electric start control
    • Electric starting motors — single 24V
    • Starting aids
    • Battery sets — (24V dry), cables, and rack
  • General
    • Special paint

Request a Quote

Find a Boyd CAT
Location or Rep Near You