Industrial:
Cat® C0.5 Diesel Engine
Contact Us About This Product
Click a link to download the document:
- Engine Configuration
- In-Line 2, 4-Stroke-Cycle
- Cooling System Capacity
- 1.1 L (1.16 qt)
- Lube System (refill)
- 1.6-2.0 L (1.7-2.1 qt)
- Length
- 407 mm (16 in)
The Cat® C0.5 Industrial Diesel Engine is offered in ratings ranging from 4.1-6.4 kW (5.5-8.6 hp) @ 2000-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 8.2-10.2 kW (11.0-13.7 hp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.5 engines include: Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.
Product Specs
-
General
- Engine Configuration
- In-Line 2, 4-Stroke-Cycle
- Cooling System Capacity
- 1.1 L (1.16 qt)
- Lube System (refill)
- 1.6-2.0 L (1.7-2.1 qt)
- Bore
- 2.6in
- Stroke
- 2.8in
- Displacement
- 31in³
- Aspiration
- Naturally Aspirated (NA)
- Compression Ratio
- 23.5:1
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Engine Configuration
- In-Line 2
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 407 mm (16 in)
- Width
- 371 mm (14.6 in)
- Height
- 523 mm (20.6 in)
- Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
- 57 kg (126 lb)
-
Power Rating
- Minimum Power
- 11HP
- Maximum Power
- 13.7HP
- Rated Speed
- 2000-3600 rpm
- Maximum Torque
- 22lb-ft @ 1600 rpm
-
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final
-
Engine Dimensions - Approximate
- Length
- 16in
- Width
- 14.6in
- Height
- 20.6in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 126lb
Equipment
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheel And Flywheel Housing
-
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request