Industrial:
Cat® C0.5 Diesel Engine
Contact Us About This Product
Click a link to download the document:
- Minimum Power
- 11.0 bhp
- Maximum Power
- 13.7 bhp
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Rated Speed
- 2800-3600 rpm
The C0.5 Industrial Diesel Engine is offered in ratings ranging from 8.2-10.2 bkW (11.0-13.7 bhp) @ 2800-3600 rpm. These ratings are available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.5 engines include Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.
Product Specs
-
Power Rating
- Minimum Power
- 11.0bhp
- Maximum Power
- 13.7bhp
- Rated Speed
- 2800-3600 rpm
- Minimum Power
- 11BHP
- Maximum Power
- 13.7BHP
- Rated Speed
- 2800-3600 rpm
- Maximum Power
- 13.7HP
- Maximum Torque
- 22lb-ft @ 2000 rpm
- Rated Speed
- 2800-3600 rpm
- Minimum Power
- 11HP
-
Emission Standards
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
-
General
- Engine Configuration
- Inline 2, 4-Stroke-Cycle Diesel
- Bore
- 67 mm (2.64 in)
- Stroke
- 72 mm (2.83 in)
- Displacement
- 0.5 L (31 in³)
- Aspiration
- Naturally Aspirated (NA)
- Compression Ratio
- 23.5:1
- Combustion System
- Indirect Injection
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 1.61-2.01 L (1.70-2.12 qt)
- Engine Configuration
- Inline 2, 4-Stroke-Cycle Diesel
- Bore
- 67 mm (2.64 in)
- Stroke
- 72 mm (2.83 in)
- Aspiration
- Naturally Aspirated (NA)
- Displacement
- 0.5 L (31 in³)
- Compression Ratio
- 23.5:1
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 1.61-2.01 L (1.70-2.12 qt)
- Engine Configuration
- Inline 2, 4-Stroke-Cycle Diesel
- Bore
- 2.6in
- Stroke
- 2.8in
- Displacement
- 31in³
- Compression Ratio
- 23.5:1
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 407 mm (16 in)
- Width
- 371 mm (14.6 in)
- Height
- 523 mm (20.6 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 57 kg (126 lb)
-
Engine Dimensions - Approximate
- Height
- 523 mm (20.6 in)
- Length
- 407 mm (16 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 57 kg (126 lb)
- Width
- 371 mm (14.6 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 126lb
- Length
- 16in
- Width
- 14.6in
- Height
- 20.6in
Equipment
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheel And Flywheel Housing
-
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request