Industrial:

Cat® C0.7 Diesel Engine

C0.7 Tier 4 Diesel Engines - Highly Regulated
Engine Configuration
In-Line 3, 4-Stroke-Cycle Diesel
Cooling System Capacity
1.2 L (1.27 qt)
Lube System (refill)
2.35-3.05 L (2.48-3.22 qt)
Length
480 mm (18.9 in)

The Cat® C0.7 Industrial Diesel Engine is offered at 9 bkW (12 bhp) @ 2200 rpm and meets U.S. EPA Tier 4 Final emission standards. Ratings: 12.2-15.3 bkW (16.4-20.5 bhp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.7 engines include: Compactors/Rollers, General Industrial, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.



Product Specs

  • General

  • Engine Configuration
    In-Line 3, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    1.2 L (1.27 qt)
    Lube System (refill)
    2.35-3.05 L (2.48-3.22 qt)
    Bore
    2.6in
    Stroke
    2.8in
    Displacement
    46.5in³
    Aspiration
    Naturally Aspirated (NA)
    Compression Ratio
    23.5:1
    Combustion System
    Indirect Injection
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    In-Line 3
  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    480 mm (18.9 in)
    Width
    371 mm (14.6 in)
    Height
    528 mm (20.8 in)
    Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    71 kg (156.6 lb)
  • Power Rating

  • Minimum Power
    11.8HP
    Maximum Power
    17.8HP
    Rated Speed
    2200-3600 rpm
    Maximum Torque
    32lb-ft @ 2400 rpm
  • Emission Standards

  • Emissions
    U.S. EPA Tier 4 Final, EU Stage V
  • Engine Dimensions - Approximate

  • Length
    18.9in
    Width
    14.6in
    Height
    20.8in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    156.6lb

Equipment

  • Air Inlet
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X