Industrial:

Cat® C13 Industrial Power Unit

Minimum Power
385.0 bhp
Maximum Power
520.0 bhp
Emissions
U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
Rated Speed
1800-2100 rpm

The Cat® C13Industrial Power Unit is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.



Product Specs

  • Power Rating

  • Minimum Power
    385.0bhp
    Maximum Power
    520.0bhp
    Rated Speed
    1800-2100 rpm
    Minimum Power
    385HP
    Maximum Power
    520HP
    Rated Speed
    1800-2100 rpm
  • Emission Standards

  • Emissions
    U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
    Emissions
    U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 and Korea Tier 4 Final emissions standards
  • General

  • Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    130 mm (5.12 in)
    Stroke
    157 mm (6.18 in)
    Displacement
    12.5 L (762.8 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    17:1
    Rotation (from flywheel end)
    Counterclockwise
    Cooling System Capacity
    60.7 L (64.2 qt)
    Lube System (refill)
    34 L (35.9 qt)
    Bore
    5.1in
    Stroke
    6.2in
    Displacement
    762.8in³
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    130 mm (5.12 in)
    Stroke
    157 mm (6.18 in)
    Displacement
    12.5 L (762.8 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    17.0:1
    Rotation from Flywheel End
    Counterclockwise
    Cooling System - Capacity
    60.7 L (64.2 qt)
    Lube System - Refill
    34 L (35.9 qt)
  • Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • Diameter
    330.2 mm (13 in)
    Width
    779.8-1069 mm (30.7-42.1 in)
    Height
    451.3-654 mm (17.8-25.7 in)
    Weight
    248-259 kg (547-571 lb)
  • PETU Dimensions - Tier 4 Final Only

  • Volume Capacity
    51.1qt (US)
  • Power Unit Dimensions - Approximate

  • Length
    2085-2122 mm (82.1-83.5 in)
    Width
    1157-1247 mm (45.6-49 in)
    Height
    1928-2082 mm (75.9-81.97 in)
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    2085-2304 kg (4596-5080 lb)
  • PETU Dimensions - Tier 4 Final, Stage IV Only

  • Volume Capacity
    48.4 L (51.1 qt)
    Length
    854 mm (33.6 in)
    Width
    287 mm (11.3 in)
    Height
    551 mm (21.7 in)
    Weight
    19.42 mm (42.8 lb)
  • Passive Regeneration System Aftertreatment Dimensions - Approximate

  • Length
    974.8 mm (38.4 in)
    Width
    958.3 mm (37.7 in)
    Height
    547.2 mm (21.5 in)
    Weight
    140 kg (308.6 lb)
  • Cat Regeneration System Aftertreatment Dimensions - Approximate

  • Diameter
    330.2 mm (13 in)
    Height
    451.3-654 mm (17.8-25.7 in)
    Weight
    248-259 kg (547-571 lb)
    Width
    779.8-1069 mm (30.7-42.1 in)

Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage V)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage V).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage V)
  • Power Take Off (pto)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Cat yellow
  • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X