Industrial:

Cat® C2.2 Diesel Engine

C2.2 LRC Diesel Engines - Lesser Regulated & Non-Regulated
Minimum Power
41.6 bhp
Maximum Power
66.1 bhp
Emissions
U.S. EPA Tier 4 Interim Equivalent
Rated Speed
2200-3000 rpm

The Cat® C2.2 Industrial Diesel Engine is offered in ratings ranging from 31-49.3 bkW (41.6-66.1 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim equivalent) emission standards. Industries and applications powered by C2.2 engines include: Agriculture, Aerial Lifts, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, General Industrial, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Mobile Sweepers, Paving Equipment, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.



Product Specs

  • Power Rating

  • Minimum Power
    41.6bhp
    Maximum Power
    66.1bhp
    Rated Speed
    2200-3000 rpm
    Minimum Power
    41.6BHP
    Maximum Power
    66.1BHP
    Rated Speed
    2200-3000 rpm
    Maximum Power
    66HP
    Maximum Torque
    153lb-ft @ 1800 rpm
    Rated Speed
    2200-3000 rpm
    Minimum Power
    41.6HP
  • Emission Standards

  • Emissions
    U.S. EPA Tier 4 Interim Equivalent
    Emissions
    U.S. EPA Tier 4 Interim Equivalent
    Emissions
    U.S. EPA Tier 4 Interim Equivalent
  • General

  • Engine Configuration
    Inline 4, 4-Stroke-Cycle Diesel
    Bore
    84 mm (3.3 in)
    Stroke
    100 mm (3.9 in)
    Displacement
    2.216 L (135 in³)
    Aspiration
    Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
    Compression Ratio
    23.3:1
    Combustion System
    Indirect Injection
    Rotation (from flywheel end)
    Counterclockwise
    Lube System (refill)
    10.6 L (11.2 qt)
    Engine Configuration
    Inline 4, 4-Stroke-Cycle Diesel
    Bore
    84 mm (3.3 in)
    Stroke
    100 mm (3.9 in)
    Aspiration
    Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
    Displacement
    2.216 L (135 in³)
    Compression Ratio
    23.3:1
    Combustion System
    Indirect Injection
    Rotation from Flywheel End
    Counterclockwise
    Lube System - Refill
    10.6 L (11.2 qt)
    Engine Configuration
    Inline 4, 4-Stroke-Cycle Diesel
    Bore
    3.3in
    Stroke
    3.9in
    Displacement
    135in³
    Compression Ratio
    23.3:1
    Aspiration
    Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
    Combustion System
    Indirect Injection
    Rotation from Flywheel End
    Counterclockwise
  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    660-664 mm (26-26.14in)
    Width
    459-531 mm (18.1-21 in)
    Height
    725 mm (28.5 in)
    Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
    184-194 kg (406-427.7 lb)
  • Engine Dimensions - Approximate

  • Height
    725 mm (28.5 in)
    Length
    660-664 mm (26-26.14in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    184-194 kg (406-427.7 lb)
    Width
    459-531 mm (18.1-21 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    427.7lb
    Length
    26in
    Width
    19.3in
    Height
    27.5in

Equipment

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheels And Flywheel Housing
    • SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
    • Choice of SAE No. 4 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X