Industrial:

Cat® C2.2 Diesel Engine

Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel
Cooling System Capacity
4.3 L (4.5 qt)
Lube System (refill)
9.3 L (9.8 qt)
Length
764 mm (30.07 in)

The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.



Product Specs

  • General

  • Engine Configuration
    In-Line 4, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    4.3 L (4.5 qt)
    Lube System (refill)
    9.3 L (9.8 qt)
    Engine Configuration
    In-Line 4
    Bore
    84 mm (3.3 in)
    Stroke
    100 mm (3.9 in)
    Displacement
    2.2 L (135 in³)
    Cooling System - Capacity
    4.3 L (4.5 qt)
    Lube System - Refill
    9.3 L (9.8 qt)
    Bore
    3.3in
    Stroke
    3.9in
    Displacement
    135in³
    Aspiration
    Turbocharged (T) or Turbocharged-Aftercooled (TA)
    Compression Ratio
    18.0:1
    Combustion System
    Direct Injection
    Rotation from Flywheel End
    Counterclockwise
  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    764 mm (30.07 in)
    Width
    545 mm (21.5 in)
    Height
    736 mm (28.9 in)
    Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    230 kg (507 lbs)
  • Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    408.4 mm (16.07 in)
    Weight
    5.8 kg (12.79 lb)
    Diameter
    155 mm (6.1 in)
    Length, including bolt heads
    408.4 mm (16.1 in)
    Diameter, to cover bolts
    167 mm (6.6 in)
  • Engine Dimensions - Approximate

  • Height
    736 mm (28.9 in)
    Length
    764 mm (30.07 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    230 kg (507 lbs)
    Width
    545 mm (21.5 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    507lb
    Length
    30.1in
    Width
    21.4in
    Height
    29in
  • Power Rating

  • Minimum Power
    48.8HP
    Maximum Power
    67.1HP
    Rated Speed
    2800 rpm
    Maximum Torque
    153lb-ft @ 1800 rpm
  • Aftertreatment Dimensions - Approximate

  • Diameter
    155 mm (6.1 in)
    Length
    408.4 mm (16.07 in)
    Weight
    5.8 kg (12.79 lb)
  • Emission Standards

  • Emissions
    U.S. EPA & CARB Tier 4 Final
  • Aftertreatment Dimensions

  • Length
    16in
    Diameter
    6.1in
    Weight
    12.5lb

Equipment

  • Control System
    • Alternator 12 volt 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
    • Electronic control unit - chassis mounted
    • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
    • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
  • Flywheels And Flywheel Housing
    • SAE No. 4 standard flywheel housing
    • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
  • Fuel System
    • 2000 bar high-pressure common rail system
    • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
  • Power Take Off (pto)
    • SAE A PTO drive
  • General
    • Cast iron engine block
    • Cast iron exhaust manifold
    • Gradeability 35° continuous
    • Paint: Cat yellow
  • U.s. Epa Tier 4 Final, Eu Stage Iiib Aftertreatment/clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X