Industrial:

Cat® C7.1 Industrial Power Unit

Minimum Power
202.0 bhp
Maximum Power
275.0 bhp
Emissions
U.S. EPA Tier 4 Final, EU Stage IV
Rated Speed
1800-2200 rpm

The C7.1 Industrial Power Unit is offered in ratings ranging from 151-205 bkW (202-275 bhp) @ 1800-2200 rpm. These ratings meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.



Product Specs

  • Power Rating

  • Minimum Power
    202.0bhp
    Maximum Power
    275.0bhp
    Rated Speed
    1800-2200 rpm
    Minimum Power
    202HP
    Maximum Power
    275HP
    Rated Speed
    1800-2200 rpm
  • Emission Standards

  • Emissions
    U.S. EPA Tier 4 Final, EU Stage IV
    Emissions
    U.S. EPA Tier 4 Final
  • General

  • Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    105 mm (4.13 in)
    Stroke
    135 mm (5.3 in)
    Displacement
    7.01 L (427.7 in³)
    Aspiration
    Series Turbocharged Aftercooled (TTA)
    Compression Ratio
    16.5:1
    Rotation (from flywheel end)
    Counterclockwise
    Cooling System Capacity
    15.2 L (16 qt)
    Lube System (refill)
    13-16 L (13.7-16.9 qt)
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    105 mm (4.13 in)
    Stroke
    135 mm (5.3 in)
    Displacement
    7.01 L (427.7 in³)
    Aspiration
    Series Turbocharged Aftercooled (TTA)
    Compression Ratio
    16.5:1
    Rotation from Flywheel End
    Counterclockwise
    Cooling System - Capacity
    15.2 L (16 qt)
    Lube System - Refill
    13-16 L (13.7-16.9 qt)
    Bore
    4.1in
    Stroke
    5.3in
    Displacement
    427.7in³
  • Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • Diameter
    287-337.8 mm (11.3-13.3 in)
    Weight
    124-134 kg (273.4-295.4 lb)
  • Power Unit Dimensions - Approximate

  • Length
    1461 mm (57.5 in)
    Width
    1769 mm (69.6 in)
    Height
    916 mm (36.1 in)
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    1000 kg (2204 lb)
  • Aftertreatment Dimensions - Approximate

  • Width
    714.4 mm (28.1 in)
    Height
    618.5-643.9 mm (24.3-25.3 in)
    Diameter
    287-337.8 mm (11.3-13.3 in)
    Weight
    124-134 kg (273.4-295.4 lb)
  • Aftertreatment Dimensions

  • Height
    25.3in
    Diameter
    13.3in
    Weight
    296lb

Equipment

  • Air Inlet
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
    • ACERT Technology
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • 3" flex pipe connection kit with straight, 45°, and 90° options for flexibility
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment/ Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Selective Catalytic Reduction (SCR)
    • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X