Land Mechanical Engines:

C18 ACERT Tier 4 Final

C18 ACERT™ Tier 4 Final Petroleum Engine
Minimum Rating
755.0 bhp
Maximum Rating
800.0 bhp
Emissions
U.S. EPA Non-road Tier 4 Final
Rated Speed
1800.0 RPM

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat C18 ACERT™ Industrial Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.



Product Specs

  • Engine Specifications

  • Minimum Rating
    755.0bhp
    Maximum Rating
    800.0bhp
    Emissions
    U.S. EPA Non-road Tier 4 Final
    Rated Speed
    1800.0RPM
    Bore
    5.7in
    Stroke
    7.2in
    Displacement
    1104.0in3
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight, net dry
    3482.0lb
    Oil Change Interval
    250 - 500
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Stroke
    7.2in
    Displacement
    1104in³
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight - Net Dry
    3482lb
    Oil Change Interval
    250 - 500
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Governor and Protection
    ADEM A4
    Minimum Rating
    755BHP
    Maximum Rating
    800BHP
    Emissions
    U.S. EPA Non-road Tier 4 Final
    Rated Speed
    1800r/min
    Bore
    5.7in
  • Dimensions

  • Length
    60.2in
    Width
    37.8in
    Height
    50.5in
    Length
    60.2in
    Width
    37.8in
    Height
    50.5in
  • Capacity for Liquids

  • Minimum Cooling System - Engine Only
    7.1gal (US)

Equipment

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump
  • Exhaust System
    • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X