Land Mechanical Engines:

C18 ACERT Tier 4 Interim / EU Stage IIIB

C18 ACERT™ Tier 4 I Petroleum Engine
Minimum Rating
600.0 bhp
Maximum Rating
755.0 bhp
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Rated Speed
1900.0 RPM

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Interim or EU Stage IIIB emissions certifications in land mechanical drilling applications such as mud pump drives. Cat C18 ACERT™ Industrial Diesel Engine. Ratings: 447-522 bkW (600-700 bhp)@ 1800-1900 rpm meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards. Rating 563 bkW (755 bhp) @ 1800-1900 rpm meets U.S. EPA Tier 4 Interim emission standards.



Product Specs

  • Engine Specifications

  • Minimum Rating
    600.0bhp
    Maximum Rating
    755.0bhp
    Emissions
    U.S. EPA Tier 4 Interim, EU Stage IIIB
    Rated Speed
    1900.0RPM
    Bore
    5.7in
    Stroke
    7.2in
    Displacement
    1104.5in3
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight, net dry
    3482.0lb
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Minimum Rating
    600BHP
    Maximum Rating
    755BHP
    Emissions
    U.S. EPA Tier 4 Interim, EU Stage IIIB
    Rated Speed
    1900r/min
    Bore
    5.7in
    Stroke
    7.2in
    Displacement
    1104.5in³
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight - Net Dry
    3482lb
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Governor and Protection
    ADEM A4
  • Dimensions

  • Length
    60.2in
    Width
    37.8in
    Height
    3482.0in
    Length
    60.2in
    Width
    37.8in
    Height
    3482in
  • Capacity for Liquids

  • Maximum Cooling System - Engine Only
    7.1gal (US)

Equipment

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, and center)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X