Land Mechanical Engines:

C27 ACERT Land Mechanical Drilling Engine

Minimum Rating
800.0 bhp
Maximum Rating
1150.0 bhp
Emissions
U.S. EPA Non-road Tier 2
Rated Speed
2100.0 RPM

Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling applications such as mud pump drives. Cat C27 ACERT™ Industrial Diesel Engine. Ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.



Product Specs

  • Engine Specifications

  • Minimum Rating
    800.0bhp
    Maximum Rating
    1150.0bhp
    Emissions
    U.S. EPA Non-road Tier 2
    Rated Speed
    2100.0RPM
    Bore
    5.4in
    Stroke
    6.0in
    Displacement
    1658.0in3
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight, net dry
    6382.0lb
    Oil Change Interval
    250
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Minimum Rating
    800BHP
    Maximum Rating
    1150BHP
    Emissions
    U.S. EPA Non-road Tier 2
    Rated Speed
    2100r/min
    Bore
    5.4in
    Stroke
    6in
    Displacement
    1658in³
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight - Net Dry
    6382lb
    Oil Change Interval
    250
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Governor and Protection
    ADEM A3
  • Dimensions

  • Length
    75.5in
    Width
    57.6in
    Height
    52.0in
    Length
    75.5in
    Width
    57.6in
    Height
    52in
  • Capacity for Liquids

  • Minimum Cooling System - Engine Only
    14.5gal (US)

Equipment

  • Air Inlet System
    • Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Cold mode start strategy
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and TEL
    • Electronic diagnostics and fault logging
    • Engine monitoring and protection system (speed, temperature, pressure)
    • J1939 Broadcast (diagnostic, engine status, and control)
  • Cooling System
    • Thermostats and housing — outlet LH vertical orientation
    • Jacket water pump — gear-driven, centrifugal RH
  • Exhaust System
    • Exhaust manifold — dry, heat shields
    • Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
    • Water-cooled center sections
  • Flywheels And Flywheel Housings
    • SAE No. 0 or SAE No. 1
    • SAE standard rotation
  • Fuel System
    • MEUI system
    • Fuel filter, RH ( 2 micron high performance)
    • Fuel transfer pump
    • Fuel priming pump (optional electric priming pump)
  • Lube System
    • Crankcase breather — rear mounted
    • Oil cooler — RH
    • Side turbo — oil filler in RH front gear case
    • Rear turbo — oil filler in RH valve cover
    • Oil level gauge — RH
    • Oil filter — RH
    • Oil pan rear sump
  • Mounting System
    • Front support — narrow
  • Power Take-offs
    • Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
  • General
    • Vibration damper
    • Paint — Cat yellow
    • Lifting eyes
    • Automatic variable timing, electronic
    • Electronic installation kit 70-pin connector (connectors, pins, sockets)
  • Air Inlet System
    • Air lines
    • Air cleaners
    • Precleaners
  • Charging System
    • Battery chargers
    • Charging alternators
    • Alternator mountings
  • Circuit Breakers
    • Circuit breaker mounting
  • Cooling System
    • Blower fans
    • Suction fans
    • Radiators
  • Exhaust System
    • Muffler
  • Fuel Systems
    • Electric fuel priming pump
  • Instrumentation
    • Gauges and instrument panels
  • Lube System
    • Lubricating oil
    • Oil pan
    • Oil filter
  • Mounting System
    • Engine supports
  • Power Take-offs
    • Hydraulic pump drives
    • Pulley
    • Auxiliary drive
  • Starting System
    • Electric starting motor
    • Battery sets - 24V
    • Battery cable
    • Battery rack
    • Starting aids
  • Packaging
    • Overseas preservation
    • Storage preservation
    • Export packaging

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X