Land Mechanical Engines:

C32 ACERT Land Mechanical Drilling Engine

C32 ACERT Land Drilling Engines
Minimum Rating
800.0 bhp
Maximum Rating
1500.0 bhp
Emissions
U.S. EPA Non-road Tier 2
Rated Speed
2100.0 RPM

Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions.This is an ideal engine for land mechanical drilling applications such as mud pump drives.Cat C32 ACERT™ Industrial Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.



Product Specs

  • Engine Specifications

  • Minimum Rating
    800.0bhp
    Maximum Rating
    1500.0bhp
    Emissions
    U.S. EPA Non-road Tier 2
    Rated Speed
    2100.0RPM
    Bore
    5.7in
    Stroke
    6.4in
    Displacement
    1953.0in3
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight, net dry
    5040.0lb
    Oil Change Interval
    250
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Minimum Rating
    800BHP
    Maximum Rating
    1500BHP
    Emissions
    U.S. EPA Non-road Tier 2
    Rated Speed
    2100r/min
    Bore
    5.7in
    Stroke
    6.4in
    Displacement
    1953in³
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight - Net Dry
    5040lb
    Oil Change Interval
    250
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Governor and Protection
    ADEM A3
  • Dimensions

  • Length
    75.5in
    Width
    85.0in
    Height
    52.0in
    Length
    75.5in
    Width
    85in
    Height
    52in
  • Capacity for Liquids

  • Minimum Cooling System - Engine Only
    14.5gal (US)

Equipment

  • Air Inlet System
    • Quad turbocharger — 3 cylinder exhaust to each turbo
    • Connections configured for ATAAC (Air-to-Air-Aftercooled)or remote heat exchanger
  • Control System
    • ADEM A4 electronic control module
    • Electronic governing, PTO speed control
    • Customer programmable ratings
    • Cold mode start strategy
    • Automatic altitude compensation
    • Automatic fuel temperature compensation
    • Programmable low and high idle, and top engine speedlimit
    • Electronic diagnostics and fault logging
    • Engine monitoring system
    • SAE J1939 broadcast (diagnostic and engine status)
  • Cooling System
    • Gear-driven centrifugal jacket water pump — RH
    • Integrated thermostat and housing
    • Engine oil cooler
    • Optional installed transmission oil cooler
  • Exhaust System
    • Exhaust manifold — dry
    • Two vertical exhaust outlets (front and rear)
  • Fuel System
    • MEUI
    • Fuel priming pump
    • Fuel transfer pump
    • Primary and secondary fuel filter — RH configured forremote mounting (installed RH on shipping plate)
  • Flywheels And Flywheel Housing
    • SAE No. 0 or SAE No. 1 flywheel iron housing
    • SAE No. 0 or SAE No. 1 flywheel
    • Optional transmission adapter
  • Lube System
    • Crankcase breather
    • Oil filter — RH standard, optional LH or remote mountservice
    • Oil level gauge — RH standard, optional LH or dualservice
    • Oil filler — RH standard, optional LH or dual service
    • Shallow oil pan, rear sump
  • Mounting System
    • Trunnion front support
    • Vertical and horizontal pads on rear flywheel housing
  • Protection System
    • 24V electronic
    • Engine overspeed with optional air shut-offs withindicators
    • Low engine oil pressure
    • Fuel filter restriction
    • Fuel temperature
    • High engine coolant temperature
    • Low engine coolant temperature
  • General
    • Vibration damper and optional guard
    • Lifting eyes
    • Optional customer wiring connector
    • Service tool connector
    • Paint — Cat yellow
  • Air Inlet System
    • Air cleaner
    • Air inlet adapters
    • Turbocharger outlet adapters
    • Air lines
  • Charging System
    • Battery chargers
    • Charging alternators
    • Alternator mounting
    • Circuit breakers and mountings
  • Cooling System
    • Dry charge coolant conditioners
    • Thermostat housing
    • Coolant level sensor
    • Radiator
    • Blower fans
    • Suction fans
    • Fan adapters
    • Fan drives
  • Emissions
    • IMO certifications
  • Exhaust System
    • Elbows
    • Mufflers
  • Fuel Systems
    • Electric fuel priming pump
  • Instrumentation
    • Customer management device
    • Interconnect harness
    • Gauges and instrument panels
  • Lube System
    • Oil pans
    • Oil service side
    • Oil level gauge
    • Oil filters
    • Lubricating oils
  • Mounting System
    • Structural steel base
    • Engine support — front
    • Engine support — rear
  • Power Take-offs
    • Auxiliary drive
    • Damper pulley
    • Hydraulics gear pumps
  • Protection System
    • Mechanical shutoffs
    • Solenoid shutoffs
  • Starting System
    • Electric starting motors – 12V, 24V
    • Battery sets – 24V
    • Battery cable
    • Battery rack
    • Starting aids
  • Transmission Arrangement
    • Transmissions water lines
    • Transmissions cooler

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X