Oil and Gas:

C13 ACERT™ Tier 4 Final Engine

C13 ACERT™ Tier 4 Final Petroleum Engine
Length
50.1 in.
Width
39.2 in.
Height
44.6 in.
Weight
2520.0 lb

Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require compliance with the highest emission standards in well service applications such as workover rigs, pump skids, acidizing units, cementing units, and hydraulic power units.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.C13 ACERT engines with ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about Emissions describes the particular rating’s emissions technology. For more information about emissions certification, please contact your local Cat dealer.



Product Specs

  • Dimensions

  • Length
    50.1in.
    Width
    39.2in.
    Height
    44.6in.
    Weight
    2520.0lb
    Length
    50.1in
    Width
    39.2in
    Height
    44.6in
    Weight
    2520lb
  • General Specifications

  • Minimum Rating
    385BHP
    Maximum Rating
    520BHP
    Aspiration
    Turbocharged-Aftercooled
    Displacement
    762.8in³
    Flywheel and Flywheel Housing
    SAE 1
    Flywheel Teeth
    113
    Stroke
    6.18in
    Bore
    5.12in
  • Emissions

  • Emissions
    EPA Tier 4 Final and EU Stage IV

Equipment

  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
  • Cooling System
    • Cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
  • Exhaust System
    • Mid-mount turbocharged system with front and rear exhaust configurations
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
  • General
    • Paint: Cat yellow

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X