Diesel Generator Sets:
3512 Generator Set
Contact Us About This Product
Click a link to download the document:
- Dry Weight - Genset (maximum)
- 22650 lb
- Compression Ratio
- Aspiration
- Fuel System
- NaN
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Product Specs
-
Generator Set Dimensions
- Dry Weight - Genset (maximum)
- 22650lb
- Dry Weight - Genset (minimum)
- 22210lb
- Length - Maximum
- 218.8in
- Height - Maximum
- 93.2in
- Width - Maximum
- 77.8in
- Length - Minimum
- 214.8in
-
Generator Set Specifications
- Compression Ratio
- Aspiration
- Fuel System
- NaN
- Displacement
- 51.8
- Length - Maximum
- 218.8in
- Width - Maximum
- 77.8
- Minimum Rating
- 890 ekW
- Maximum Rating
- 1250 ekW
- Voltage
- 380 to 13800 Volts
- Frequency
- 60 Hz
- Speed
- 1800 rpm
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Duty Cycle
- Standby, Mission Critical, Prime, Continuous
- Minimum Rating
- 890 ekW
- Voltage
- 220 to 13800 Volts
-
Engine Specifications
- Bore
- 6.69
- Displacement
- 190mm
- Engine Model
- 3512 TA, V-12, 4-Stroke Water-Cooled Diesel
- Compression Ratio
- 13.5:1
- Aspiration
- TA
- Governor Type
- Woodward
- Fuel System
- Direct Unit Injection
- Bore
- 6.69in
- Displacement
- 3161.03in³
- Stroke
- 7.48in
- Fuel System
- 77.8in
- Maximum Rating
- NaN
- Emissions/Fuel Strategy
- Engine Model
- 3512 TA, V-12, 4-Stroke Water-Cooled Diesel
- Frequency
- 60 Hz
Equipment
-
- Air Inlet System
-
- Air cleaner; single element canister type with service indicator
-
- Air Inlet
-
- Air Cleaner
-
- Cooling
-
- Radiator fan and fan drive
- JWAC.
-
- Exhaust
-
- Exhaust flange outlet
- Dry Exhaust Manifold
-
- Fuel
-
- Secondary fuel filter
- Primary fuel filter with integral water separator
- Fuel cooler; not included with packages without radiator
- Secondary fuel filters
- Fuel priming pump
-
- Generator
-
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
-
- Power Termination
-
- Bus Bar
-
- Control Panel
-
- Accessory module data link
- Features include:
- Over / under voltage (27 / 59)
- Coolant temperature
- Generator phase sequence
- Serial annunciator module data link
- Low coolant temperature
- Low oil pressure
- DC volts
- Over / Under voltage (27/59)
- Auto/start/stop control
- Exciter diode monitor
- Failure to start (overcrank)
- 6 programmable digital inputs
- Emergency stop
- Generator mounted - rear facing
- Programmable protective relaying functions:
- Power factor (per phase & average)
- Alarm acknowledge
- DC volts
- kVA (per phase, average & percent)
- Overspeed
- IVR includes:
- RFI suppression
- Emergency stop pushbutton
- Package mounted radiator (except C175)
- Overspeed
- Emergency stop
- kVAr (per phase, average & percent)
- Environmental sealed front face
- Customer data link (Modbus RTU)
- Min / max exciter limiter
- Speed adjust
- Operating hours
- True RMS AC metering, 3-phase, +/-2% accuracy
- Reactive droop capability
- Customizable screens
- Volts (L-L & L-N)
- PLC functionality
- Digital indication for:
- RPM
- High coolant temperature
- Digital indication for:
- kW-hr (total)
- Over / under frequency (81 o / u)
- Low coolant temperature
- 24 Volt DC operation
- kW-hr (total)
- Oil pressure (psi, kPa or bar)
- Warning/shutdown with common LED indication of shutdowns for:
- kVAr-hr (total)
- EMCP 4.2B
- 2 programmable relay outputs (Form C)
- kVAr-hr (total)
- kW (per phase, average & percent)
- kVAr (per phase, average & percent)
- Engine cool-down timer
- Over / Under frequency (81 o/u)
- Engine cool-down timer
- True RMS AC metering, 3-phase, +/-2% accuracy
- Low coolant level
- Frequency (Hz)
- Controls:
- Generator phase sequence
- High coolant temperature
- Communications:
- Reverse Power (kW) (32)
- Volts (L-L & L-N), frequency (Hz)
- Alarm acknowledge
- Environmental sealed front face
- Controls:
- Operating hours
- Generator mounted - rear facing
- Power Factor (per phase & average)
- kW (per phase, average & percent)
- Programmable protective relaying functions:
- Engine cycle crank
- Reverse Power (kW) (32)
- 24-volt DC operation
- Lamp test
- Text alarm / event descriptions
- Failure to start (overcrank)
- Generator set packages include Caterpillar' s Voltage Regulator (IVR)
- Warning / shutdown with common LED indication of shutdowns for:
- Text alarm / event descriptions
- 4 programmable relay outputs (Form A)
- Lamp test
- Load histogram feature
- Coolant temperature
- Auto / start / stop control
- Overcurrent (50 / 51)
- kVA (per phase, average & percent)
- KVAR/PF modes
- Engine cycle crank
- 3 Phase voltage sensing
- 2 programmable digital outputs
- Low oil pressure
- Reverse Reactive Power (kVAr) (32RV)
- EMCP 4 Genset Controller
- RPM
- Oil pressure (psi, kPa or bar)
- Amps (per phase & average)
- Low coolant level
- Amps (per phase & average)
- EMCP4.2 controller including:
-
- Cooling System
-
- Radiator fan and fan drive
- Fan and belt guards
- JWAC
- Caterpillar Extended Life Coolant
- Coolant level sensors
- Coolant drain line with valve
-
- Exhaust System
-
- Dry Exhaust Manifold.
- Exhaust flange outlet(s)
-
- Fuel System
-
- Fuel cooler; not included with packages without radiator
- Flexible fuel lines - shipped loose
- Secondary fuel filters
- Fuel priming pump
-
- Generators And Attachments
-
- LV:
- Winding temperature detectors
- 3 phase brushless, salient pole
- 1800 frames are form wound, permanent magnet, with winding temperature detectors
- NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby)
- Generator set packages include Caterpillar's Digital Voltage Regulator (CDVR)
- CDVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter. Limiter and exciter diode monitor
- 6 lead
- Internal Excitation
- Busbar connections, top center mounted, top cable entry. 50 Hz models: IEC standard hole pattern
- Random wound
-
- Governing System
-
- Woodward 2301A isochronous governor
-
- Lube System
-
- Integral lube oil cooler
- Oil filter, filler and dipstick
- Oil drain lines and valve
- Fumes disposal
- Gear type lube oil pump.
- Lubricating oil.
-
- Mounting System
-
- Rubber anti-vibration mounts (shipped loos
- Rails - engine/generator/radiator mounting
-
- Starting / Charging System
-
- Battery disconnect switch
- Battery and battery rack w/cables
- 24-volt electric starting motor
-
- Generator And Attachments
-
- Random wound
- LV:
- 6 lead
- 3 phase brushless, salient pole
-
- General
-
- Right hand servicing
- Caterpillar Yellow with high gloss black rails & radiator
- Flywheel and Flywheel housing-SAE No. 00
- SAE Standard Rotation
- Paint - Caterpillar Yellow except rails and radiators gloss black
-
- Exhaust
-
- Exhaust mufflers
-
- Air Inlet System
-
- Air inlet protection
- Air cleaner - Dual element
- Remote air inlet adapters
-
- Generator
-
- Oversize and premium generators
- Internal excitation (IE)
- Permanent magnet excitation (PMG)
- Anti-condensation heater
-
- Circuit Breakers
-
- Breaker harnesses
- EMAX breaker connections
- EMAX breakers
- Enclosures - control packaging
- Cable entry options
- Low voltage, IEC standard hole
- Optional busbar power connections
- Busbar connections
-
- Power Termination
-
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
-
- Control Panels
-
- Annunciator modules
- Customer interface options
- Auxiliary box
- Mounting group - External box clips
- Governors
- Generator temperature monitoring
-
- Cooling System
-
- Heat exchangers
- 3512 MUI 1500 Radiators PGS
- Water level switch gauges
-
- Mounting
-
- Spring-type vibration isolator
- IBC isolators
- Rubber anti-vibration mounts
-
- Certificates
-
- EU declaration of conformity
- Eurasian conformity (EAC) mark
- European union certification
- European directive genset DOI
-
- Starting/charging
-
- Jacket water heater
- Battery chargers
- Charging alternator
- Heavy-duty starting system
- Oversize batteries
- Air starting motor with control and silencer
-
- Exhaust System
-
- Flexible fittings
- Mufflers
- Through wall installation kit
-
- Fuel System
-
- Primary fuel filter
-
- Generators And Attachments
-
- Space heater kt
- Generator conversions - IE and PM
-
- Instrumentation
-
- Pyrometers
-
- Lube System
-
- Oil level reg-1 shallow pan
- Manual prelube sump pumps
- Electric prelube pumps
-
- Mounting System
-
- Vibration Isolator options
-
- Protection System
-
- Explosion relief valves
-
- Special Tests / Reports
-
- PGS test report @ 0.8 power factor
- Neutral ground - LV
- PGS test report @ 1.0 power factor
- IBC seismic certification
- Neutral grounding connection
-
- Starting / Charging System
-
- Battery chargers (10 and 20 amp)
- Battery sets - 24 Volt, dry
- Electric starting motors - Duel 24 Volt
- Charging alternators
- Jacket water heaters
- Starting aids
-
- General
-
- Integral & sub-base fuel tanks
- Enclosures: sound attenuated, weather protective
- Engine barring group - installed
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- CSA Certification
- Integral & sub-base UL listed dual wall fuel tanks
- The following options are based on regional and product configuration:
- Automatic transfer switches (ATS)
- UL 2200 package
- EU Certificate of Conformance (CE)
- EEC Declaration of Conformity