Gas Compression Electric Motors:

CN3586 Electric Motor for Gas Compression

Number of Poles
8
Full Load Speed
894 rpm
Full Load Speed
894 rpm
Number of Poles
8

Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.



Product Specs

  • Electric Motor Specifications

  • Number of Poles
    8
    Full Load Speed
    894 rpm
    Full Load Speed
    894 rpm
    Number of Poles
    8
    Electric Motor Type
    Squirrel Cage Induction Motor
    Voltage/Frequency
    4000V & 4160V ± 10%/60 Hz
    Type of EX-Protection
    Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
    Mounting Designation
    F1 or F2
    Enclosure Type/Method of Cooling
    WP-II
    Insulation
    Class F
    Service Factor
    1.15 SF (1.0 VFD)
    Standards
    NEMA MG1
    Maximum Ambient Temperature
    104°F
    Maximum Altitude - Before Derate
    3300ft
    Duty
    Continuous
    Temperature Rise
    Class B at rated load
    Connection of Stator Winding
    Star
    Full Load Current
    458 Amps
    Locked Rotor Amps
    540% Code E
    Locked Rotor Torque
    60%
    No Load Current
    137 Amps
    Rated Torque
    20555lb/ft
    Shaft
    8.5in

Equipment

  • Bearings
    • Bearing RTDs for temperature monitoring
    • Insulated non-drive end bearings to reduce bearing currents
    • Anti-friction on 1500 hp (optional)
  • Rotors
    • Designed for minimal vibration
    • Dynamic balancing at full operational speed
    • Fabricated copper squirrel cages
    • Forged, keyless shaft
    • AISI 4140/DIN42CrMo4 shaft
  • Stators
    • Radial air ducts ensure uniform and efficient cooling
    • Vacuum pressure impregnated with specially formulated epoxy resin
    • 2X RTDS per Phase
    • Space heater
    • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X