Industrial:

Cat® C15 Industrial Diesel Engine

Minimum Power
440.0 bhp
Maximum Power
595.0 bhp
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Rated Speed
1800-2100 rpm

The Cat® C15 Industrial Diesel Engine is offered in ratings ranging from 328-444 bkW (440-595 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C15 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.



Product Specs

  • Power Rating

  • Minimum Power
    440.0bhp
    Maximum Power
    595.0bhp
    Rated Speed
    1800-2100 rpm
    Minimum Power
    440BHP
    Maximum Power
    595BHP
    Rated Speed
    1800-2100 rpm
    Maximum Power
    595HP
    Maximum Torque
    2004lb-ft @ 1400 rpm
    Rated Speed
    1800-2100 rpm
    Minimum Power
    440HP
  • Emission Standards

  • Emissions
    China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
    Emissions
    China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
    Emissions
    China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
  • General

  • Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    137.2 mm (5.4 in)
    Stroke
    171.4 mm (6.75 in)
    Displacement
    15.2 L (927.56 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    18.0:1
    Combustion System
    Direct Injection
    Rotation (from flywheel end)
    Counterclockwise
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    137.2 mm (5.4 in)
    Stroke
    171.4 mm (6.75 in)
    Aspiration
    Turbocharged Aftercooled (TA)
    Displacement
    15.2 L (927.56 in³)
    Compression Ratio
    18.0:1
    Combustion System
    Direct Injection
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    5.4in
    Stroke
    6.8in
    Displacement
    927.6in³
    Compression Ratio
    18.0:1
    Aspiration
    Turbocharged Aftercooled (TA)
    Combustion System
    Direct Injection
    Rotation from Flywheel End
    Counterclockwise
  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    1377 mm (54.2 in)
    Width
    926 mm (36.5 in)
    Height
    1226 mm (48.3 in)
    Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
    1469 kg (3239 lb)
  • Engine Dimensions - Approximate

  • Height
    1226 mm (48.3 in)
    Length
    1377 mm (54.2 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    1469 kg (3239 lb)
    Width
    926 mm (36.5 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    3239lb
    Length
    54.2in
    Width
    36.2in
    Height
    48.3in
    Length - Approximate
    54.2in
    Width - Approximate
    36.2in
    Height - Approximate
    48.3in

Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Fuel filter, tertiary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X