Industrial:

Cat® C3.6 Diesel Engine

Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel
Cooling System Capacity
4 L (1.06 qt)
DOC Length
TBA
DOC Weight
TBA

The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.



Product Specs

  • General

  • Engine Configuration
    In-Line 4, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    4 L (1.06 qt)
    Engine Configuration
    In-Line 4
    Bore
    98 mm (3.9 in)
    Stroke
    120 mm (4.7 in)
    Displacement
    3.6 L (220 in³)
    Cooling System - Capacity
    4 L (1.06 qt)
    Bore
    3.9in
    Stroke
    4.7in
    Displacement
    220in³
    Aspiration
    Turbocharged-Aftercooled (TA)
    Compression Ratio
    17.0:1
    Combustion System
    Direct Injection
    Rotation from Flywheel End
    Counterclockwise
  • Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • DOC Length
    TBA
    DOC Weight
    TBA
    DOC Diameter
    TBA
    SCR Weight
    TBA
    SCR Diameter
    TBA
  • Aftertreatment Dimensions - Approximate

  • DOC Diameter
    TBA
    DOC Length
    TBA
    DOC Weight
    TBA
    SCR Diameter
    TBA
    SCR Weight
    TBA
    SCR Length
    TBA
  • Engine Dimensions - Approximate

  • Height
    776 mm (30.6 in)
    Length
    667 mm (26.3 in)
    Width
    569 mm (22.4 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    840lb
    Length
    26.3in
    Width
    22.2in
    Height
    31in
    Dry Weight - Basic Operating Engine Without Optional Attachments
    275 kg (606 lbs)
  • Power Rating

  • Maximum Torque
    406lb-ft @ 1500 rpm
    Minimum Power
    74HP
    Maximum Power
    134HP
    Rated Speed
    2000-2400 rpm
  • Emission Standards

  • Emissions
    U.S. EPA & CARB Tier 4 Final, EU Stage V
  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    667 mm (26.3 in)
    Width
    569 mm (22.4 in)
    Height
    776 mm (30.6 in)

Equipment

  • Control System
    • Starter motor (12V or 24V)
    • Alternator (12V or 24V)
    • Electronic Control Unit (chassis mounted)
    • Engine control sensors and robust wiring harness
    • Data interface via CANbus J1939
  • Flywheels And Flywheel Housing
    • Flywheel housings – SAE 3 or SAE 4
    • Choice of flywheel to match industry common hydraulic pumps and transmissions
    • Side PTO with SAE A or SAE B interface
  • Fuel System
    • Fuel filter – preconnected but chassis mounted
    • With water sensor
  • Lube System
    • Lubricating oil filters
    • High incline oil pan – 35° continuous in all directions
  • General
    • Cold start capability to -20° C (-4° F) with standard equipment
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)
    • Selective Catalytic Reduction (SCR)
    • SCR Auxiliaries

Request a Quote

Find a Boyd CAT
Location or Rep Near You

BOYD CAT USED PARTS - offering discontinued, rebuilds, out of stock, and CAT bargain list and aftermarket. Save money. Buy used. Used_Parts@BoydCAT.com

X